Asosiy ma'lumotlar
Soni (dona):4
Hajmi:0.203 m³
Minimus buyurtma miqdori:4 rolls
Jami og'irlik:92 kg
Yetkazib berish vaqti:15 working day
O'lchami:L(145)*W(40)*H(35) cm
To'g'ri og'irlik:84 kg
Etkazib berish usuli:快递
xususiyat raqami:50m (Roll Length) 0.8mm / 1.0mm / 1.2mm (Thickness)
Mahsulot raqami:MFL-PU-SHOE
Mahsulot ta'rif
Microfiber Synthetic Leather, Microfiber PU Leather For Sneaker Vamp, Shoe Lining, Insole Material
Model: MFL-PU-SHOE
Specification Parameter Details Base Material Superfine fiber non-woven base + PU resin coating Standard Roll Width 1370mm Roll Length 50m per roll Thickness Options 0.8mm / 1.0mm / 1.2mm Surface Finish Matte fine grain finish, standard grey stock color Single Roll Net Weight 21 KG (1.0mm benchmark thickness) Packaging Waterproof PE film wrapped for each roll Quantity Per Export Carton 4 rolls Carton Dimension (L×W×H) 1450×400×350 mm Carton Gross Weight 92 KG
Key Product Features
Fine microfiber internal structure, soft handfeel close to genuine leather, with stable tensile and tear resistance
Uniform PU coating delivers great color fastness, less fading under sweat erosion, friction and daily washing
Moderate stiffness, suitable for vamp shaping, soft enough for shoe lining and comfortable for insole lamination
Good adhesive bonding performance, fits shoemaking cold and hot glue laminating processes well
Low water absorption, effectively reduces damp deformation for lining and insole parts during wearing
Consistent thickness and grain texture across batches, stable shrinkage rate for automated cutting production
Anti-pilling and scratch-resistant surface, long service life for casual sneakers and daily footwear
Easy die-cutting without edge fraying, reduces burr trimming workload in upper processing
Excellent flexibility after repeated bending, no cracking or peeling on vamp folding positions
Eco-friendly formula with low odor, meets finished footwear environmental requirements
Application Fields
This microfiber PU synthetic leather is widely used in sneaker manufacturers, shoe lining processing plants and insole material factories. It can be made into sneaker upper panels, shoe inner lining, insole surface covering, heel reinforcement pieces, applicable for sports shoes, casual shoes, business casual footwear and safety footwear.
Operation Guidance
- Unroll flatly to release winding tension before layout marking and cutting
- Test glue adhesion strength with designated shoemaking adhesive before bulk lamination
- Reserve proper shrinkage margin for hot pressing shaping process
- Seal roll ends with waterproof film after use to avoid moisture and dust contamination
- Stack cut pieces flat, avoid heavy compression causing surface grain indentation
Storage Guidance
- Store horizontally in cool dry ventilated warehouse, keep away from direct sunlight and heat sources
- Isolate from oily solvents and corrosive chemicals to prevent PU layer aging
- Avoid sharp scratching on surface grain during handling and storage
Maintenance Instructions
Daily Maintenance
Check surface cleanliness and packaging integrity before cutting
Batch Inspection
Spot check thickness uniformity, peeling strength and bending crack resistance for incoming rolls
Usage Precaution
Adjust hot pressing temperature and pressure according to actual material thickness
Recycling Reminder
Cutting scraps can be classified and recycled as PU synthetic leather industrial waste
Microfiber Synthetic Leather, Microfiber PU Leather For Sneaker Vamp, Shoe Lining, Insole Material
Model: MFL-PU-SHOE
Specification Parameter Details Base Material Superfine fiber non-woven base + PU resin coating Standard Roll Width 1370mm Roll Length 50m per roll Thickness Options 0.8mm / 1.0mm / 1.2mm Surface Finish Matte fine grain finish, standard grey stock color Single Roll Net Weight 21 KG (1.0mm benchmark thickness) Packaging Waterproof PE film wrapped for each roll Quantity Per Export Carton 4 rolls Carton Dimension (L×W×H) 1450×400×350 mm Carton Gross Weight 92 KG
Key Product Features
Fine microfiber internal structure, soft handfeel close to genuine leather, with stable tensile and tear resistance
Uniform PU coating delivers great color fastness, less fading under sweat erosion, friction and daily washing
Moderate stiffness, suitable for vamp shaping, soft enough for shoe lining and comfortable for insole lamination
Good adhesive bonding performance, fits shoemaking cold and hot glue laminating processes well
Low water absorption, effectively reduces damp deformation for lining and insole parts during wearing
Consistent thickness and grain texture across batches, stable shrinkage rate for automated cutting production
Anti-pilling and scratch-resistant surface, long service life for casual sneakers and daily footwear
Easy die-cutting without edge fraying, reduces burr trimming workload in upper processing
Excellent flexibility after repeated bending, no cracking or peeling on vamp folding positions
Eco-friendly formula with low odor, meets finished footwear environmental requirements
Application Fields
This microfiber PU synthetic leather is widely used in sneaker manufacturers, shoe lining processing plants and insole material factories. It can be made into sneaker upper panels, shoe inner lining, insole surface covering, heel reinforcement pieces, applicable for sports shoes, casual shoes, business casual footwear and safety footwear.
Operation Guidance
- Unroll flatly to release winding tension before layout marking and cutting
- Test glue adhesion strength with designated shoemaking adhesive before bulk lamination
- Reserve proper shrinkage margin for hot pressing shaping process
- Seal roll ends with waterproof film after use to avoid moisture and dust contamination
- Stack cut pieces flat, avoid heavy compression causing surface grain indentation
Storage Guidance
- Store horizontally in cool dry ventilated warehouse, keep away from direct sunlight and heat sources
- Isolate from oily solvents and corrosive chemicals to prevent PU layer aging
- Avoid sharp scratching on surface grain during handling and storage
Maintenance Instructions
Daily Maintenance
Check surface cleanliness and packaging integrity before cutting
Batch Inspection
Spot check thickness uniformity, peeling strength and bending crack resistance for incoming rolls
Usage Precaution
Adjust hot pressing temperature and pressure according to actual material thickness
Recycling Reminder
Cutting scraps can be classified and recycled as PU synthetic leather industrial waste
Microfiber Synthetic Leather, Microfiber PU Leather For Sneaker Vamp, Shoe Lining, Insole Material
Model: MFL-PU-SHOE
Specification Parameter Details Base Material Superfine fiber non-woven base + PU resin coating Standard Roll Width 1370mm Roll Length 50m per roll Thickness Options 0.8mm / 1.0mm / 1.2mm Surface Finish Matte fine grain finish, standard grey stock color Single Roll Net Weight 21 KG (1.0mm benchmark thickness) Packaging Waterproof PE film wrapped for each roll Quantity Per Export Carton 4 rolls Carton Dimension (L×W×H) 1450×400×350 mm Carton Gross Weight 92 KG
Key Product Features
Fine microfiber internal structure, soft handfeel close to genuine leather, with stable tensile and tear resistance
Uniform PU coating delivers great color fastness, less fading under sweat erosion, friction and daily washing
Moderate stiffness, suitable for vamp shaping, soft enough for shoe lining and comfortable for insole lamination
Good adhesive bonding performance, fits shoemaking cold and hot glue laminating processes well
Low water absorption, effectively reduces damp deformation for lining and insole parts during wearing
Consistent thickness and grain texture across batches, stable shrinkage rate for automated cutting production
Anti-pilling and scratch-resistant surface, long service life for casual sneakers and daily footwear
Easy die-cutting without edge fraying, reduces burr trimming workload in upper processing
Excellent flexibility after repeated bending, no cracking or peeling on vamp folding positions
Eco-friendly formula with low odor, meets finished footwear environmental requirements
Application Fields
This microfiber PU synthetic leather is widely used in sneaker manufacturers, shoe lining processing plants and insole material factories. It can be made into sneaker upper panels, shoe inner lining, insole surface covering, heel reinforcement pieces, applicable for sports shoes, casual shoes, business casual footwear and safety footwear.
Operation Guidance
- Unroll flatly to release winding tension before layout marking and cutting
- Test glue adhesion strength with designated shoemaking adhesive before bulk lamination
- Reserve proper shrinkage margin for hot pressing shaping process
- Seal roll ends with waterproof film after use to avoid moisture and dust contamination
- Stack cut pieces flat, avoid heavy compression causing surface grain indentation
Storage Guidance
- Store horizontally in cool dry ventilated warehouse, keep away from direct sunlight and heat sources
- Isolate from oily solvents and corrosive chemicals to prevent PU layer aging
- Avoid sharp scratching on surface grain during handling and storage
Maintenance Instructions
Daily Maintenance
Check surface cleanliness and packaging integrity before cutting
Batch Inspection
Spot check thickness uniformity, peeling strength and bending crack resistance for incoming rolls
Usage Precaution
Adjust hot pressing temperature and pressure according to actual material thickness
Recycling Reminder
Cutting scraps can be classified and recycled as PU synthetic leather industrial waste
Microfiber Synthetic Leather, Microfiber PU Leather For Sneaker Vamp, Shoe Lining, Insole Material
Model: MFL-PU-SHOE
Specification Parameter Details Base Material Superfine fiber non-woven base + PU resin coating Standard Roll Width 1370mm Roll Length 50m per roll Thickness Options 0.8mm / 1.0mm / 1.2mm Surface Finish Matte fine grain finish, standard grey stock color Single Roll Net Weight 21 KG (1.0mm benchmark thickness) Packaging Waterproof PE film wrapped for each roll Quantity Per Export Carton 4 rolls Carton Dimension (L×W×H) 1450×400×350 mm Carton Gross Weight 92 KG
Key Product Features
Fine microfiber internal structure, soft handfeel close to genuine leather, with stable tensile and tear resistance
Uniform PU coating delivers great color fastness, less fading under sweat erosion, friction and daily washing
Moderate stiffness, suitable for vamp shaping, soft enough for shoe lining and comfortable for insole lamination
Good adhesive bonding performance, fits shoemaking cold and hot glue laminating processes well
Low water absorption, effectively reduces damp deformation for lining and insole parts during wearing
Consistent thickness and grain texture across batches, stable shrinkage rate for automated cutting production
Anti-pilling and scratch-resistant surface, long service life for casual sneakers and daily footwear
Easy die-cutting without edge fraying, reduces burr trimming workload in upper processing
Excellent flexibility after repeated bending, no cracking or peeling on vamp folding positions
Eco-friendly formula with low odor, meets finished footwear environmental requirements
Application Fields
This microfiber PU synthetic leather is widely used in sneaker manufacturers, shoe lining processing plants and insole material factories. It can be made into sneaker upper panels, shoe inner lining, insole surface covering, heel reinforcement pieces, applicable for sports shoes, casual shoes, business casual footwear and safety footwear.
Operation Guidance
- Unroll flatly to release winding tension before layout marking and cutting
- Test glue adhesion strength with designated shoemaking adhesive before bulk lamination
- Reserve proper shrinkage margin for hot pressing shaping process
- Seal roll ends with waterproof film after use to avoid moisture and dust contamination
- Stack cut pieces flat, avoid heavy compression causing surface grain indentation
Storage Guidance
- Store horizontally in cool dry ventilated warehouse, keep away from direct sunlight and heat sources
- Isolate from oily solvents and corrosive chemicals to prevent PU layer aging
- Avoid sharp scratching on surface grain during handling and storage
Maintenance Instructions
Daily Maintenance
Check surface cleanliness and packaging integrity before cutting
Batch Inspection
Spot check thickness uniformity, peeling strength and bending crack resistance for incoming rolls
Usage Precaution
Adjust hot pressing temperature and pressure according to actual material thickness
Recycling Reminder
Cutting scraps can be classified and recycled as PU synthetic leather industrial waste
Microfiber Synthetic Leather, Microfiber PU Leather For Sneaker Vamp, Shoe Lining, Insole Material
Model: MFL-PU-SHOE
Specification Parameter Details Base Material Superfine fiber non-woven base + PU resin coating Standard Roll Width 1370mm Roll Length 50m per roll Thickness Options 0.8mm / 1.0mm / 1.2mm Surface Finish Matte fine grain finish, standard grey stock color Single Roll Net Weight 21 KG (1.0mm benchmark thickness) Packaging Waterproof PE film wrapped for each roll Quantity Per Export Carton 4 rolls Carton Dimension (L×W×H) 1450×400×350 mm Carton Gross Weight 92 KG
Key Product Features
Fine microfiber internal structure, soft handfeel close to genuine leather, with stable tensile and tear resistance
Uniform PU coating delivers great color fastness, less fading under sweat erosion, friction and daily washing
Moderate stiffness, suitable for vamp shaping, soft enough for shoe lining and comfortable for insole lamination
Good adhesive bonding performance, fits shoemaking cold and hot glue laminating processes well
Low water absorption, effectively reduces damp deformation for lining and insole parts during wearing
Consistent thickness and grain texture across batches, stable shrinkage rate for automated cutting production
Anti-pilling and scratch-resistant surface, long service life for casual sneakers and daily footwear
Easy die-cutting without edge fraying, reduces burr trimming workload in upper processing
Excellent flexibility after repeated bending, no cracking or peeling on vamp folding positions
Eco-friendly formula with low odor, meets finished footwear environmental requirements
Application Fields
This microfiber PU synthetic leather is widely used in sneaker manufacturers, shoe lining processing plants and insole material factories. It can be made into sneaker upper panels, shoe inner lining, insole surface covering, heel reinforcement pieces, applicable for sports shoes, casual shoes, business casual footwear and safety footwear.
Operation Guidance
- Unroll flatly to release winding tension before layout marking and cutting
- Test glue adhesion strength with designated shoemaking adhesive before bulk lamination
- Reserve proper shrinkage margin for hot pressing shaping process
- Seal roll ends with waterproof film after use to avoid moisture and dust contamination
- Stack cut pieces flat, avoid heavy compression causing surface grain indentation
Storage Guidance
- Store horizontally in cool dry ventilated warehouse, keep away from direct sunlight and heat sources
- Isolate from oily solvents and corrosive chemicals to prevent PU layer aging
- Avoid sharp scratching on surface grain during handling and storage
Maintenance Instructions
Microfiber Synthetic Leather, Microfiber PU Leather For Sneaker Vamp, Shoe Lining, Insole Material
Model: MFL-PU-SHOE
| Specification | Parameter Details |
|---|---|
| Base Material | Superfine fiber non-woven base + PU resin coating |
| Standard Roll Width | 1370mm |
| Roll Length | 50m per roll |
| Thickness Options | 0.8mm / 1.0mm / 1.2mm |
| Surface Finish | Matte fine grain finish, standard grey stock color |
| Single Roll Net Weight | 21 KG (1.0mm benchmark thickness) |
| Packaging | Waterproof PE film wrapped for each roll |
| Quantity Per Export Carton | 4 rolls |
| Carton Dimension (L×W×H) | 1450×400×350 mm |
| Carton Gross Weight | 92 KG |
Key Product Features
Application Fields
This microfiber PU synthetic leather is widely used in sneaker manufacturers, shoe lining processing plants and insole material factories. It can be made into sneaker upper panels, shoe inner lining, insole surface covering, heel reinforcement pieces, applicable for sports shoes, casual shoes, business casual footwear and safety footwear.
Operation Guidance
- Unroll flatly to release winding tension before layout marking and cutting
- Test glue adhesion strength with designated shoemaking adhesive before bulk lamination
- Reserve proper shrinkage margin for hot pressing shaping process
- Seal roll ends with waterproof film after use to avoid moisture and dust contamination
- Stack cut pieces flat, avoid heavy compression causing surface grain indentation
Storage Guidance
- Store horizontally in cool dry ventilated warehouse, keep away from direct sunlight and heat sources
- Isolate from oily solvents and corrosive chemicals to prevent PU layer aging
- Avoid sharp scratching on surface grain during handling and storage
Maintenance InstructionsDaily Maintenance
Check surface cleanliness and packaging integrity before cutting
Batch Inspection
Spot check thickness uniformity, peeling strength and bending crack resistance for incoming rolls
Usage Precaution
Adjust hot pressing temperature and pressure according to actual material thickness
Recycling Reminder
Cutting scraps can be classified and recycled as PU synthetic leather industrial waste
