Essential details
Quantity(pieces):1
Volume:2.43 m³
MOQ:1
G.W:470 kg
Lead time:15 working day
Size:L(158)*W(102)*H(146) cm
N.W:420 kg
Shipping:Land transport, Sea transport
Specification Number:1480×920×1360mm/1720×1050×1420mm
Product Code:BS-400 / BS-600
Product Introduction
Heavy Duty Four Column Hydraulic Gantry Die Cutting Machine
Model: BS-400 / BS-600
Specification BS-400 BS-600 Effective Splitting Width 400 mm 600 mm Splitting Precision ±0.02 mm uniform thickness ±0.02 mm uniform thickness Splitting Thickness Range 0.1–8 mm adjustable 0.1–8 mm adjustable Cutting System Imported endless band knife, stable cutting Imported endless band knife, stable cutting Control System PLC closed-loop digital control system PLC closed-loop digital control system Operation Panel Touch screen Touch screen Feeding Structure Rubber anti-slip feeding roller, automatic feeding Rubber anti-slip feeding roller, automatic feeding Applicable Materials Genuine leather, synthetic leather, EVA, rubber, foam, shoe composite Genuine leather, synthetic leather, EVA, rubber, foam, shoe composite Speed Control 0–20 m/min stepless adjustable feeding speed 0–20 m/min stepless adjustable feeding speed Working Power 2.2 KW 3.0 KW Working Voltage AC220V 50Hz AC220V 50Hz Grinding Device Automatic knife sharpening mechanism Automatic knife sharpening mechanism Machine Size (L×W×H) 1480×920×1360mm 1720×1050×1420mm Wooden Box Size (L×W×H) 1580×1020×1460mm 1820×1150×1520mm Net Weight 420 KG 530 KG Gross Weight 470 KG 590 KG
Key Machine Features
· PLC digital control + bilingual touch screen, parameter quick setting
· ±0.02mm ultra-precise splitting, consistent thinness for whole material
· Automatic cycle knife sharpening, keep band knife sharp for long-term use
· Stepless adjustable feeding speed, match soft leather and hard rubber/EVA
· Anti-slip compression feeding roller, no material sliding during splitting
· Closed-loop thickness adjustment, one-key save common processing parameters
· Integrated thick cast iron frame, low vibration and stable long-hour running
· Built-in dust and scrap collection box, easy to clean leather shavings
· Fast band knife replacement structure, reduce downtime for part replacement
· Overload automatic stop protection to prevent knife and motor damage
Application Fields
This PLC Band Knife Splitting Machine serves high-end shoe factories, leather goods processing plants, foam and rubber material pretreatment workshops. It evenly thins genuine leather, synthetic leather, EVA midsoles, rubber outsoles and composite shoe materials for shoe upper, insole and outsole pre-processing.
Ideal for sports shoes, casual shoes, leather dress shoes and kids shoe material thinning. Adjustable splitting thickness and feeding speed adapt to materials of different hardness, delivering uniform thin raw materials to meet high-standard shoemaking production requirements.
Operation Guidance
Check power supply, band knife tightness and grinding device before startup
Set target splitting thickness and feeding speed via touch screen according to material
Test split small material samples to verify thickness accuracy before mass processing
Place leather/EVA flat on feeding table, equipment feeds and splits automatically
Collect leather scraps, clean internal roller and shut down machine after daily work
Installation Guidance
Place machine on flat reinforced ground, fix anchor bolts for stable placement
Connect AC220V 50Hz power supply with reliable grounding wire
Fill standard hydraulic oil and install cutting dies following operation manual
Run 5–10 minutes no-load test, finish cutting debugging with raw shoe materials
Maintenance & Repair Instructions
Daily Maintenance
Clean leather shavings and surface dust; check band knife sharpness and roller tightness
Weekly Maintenance
Inspect transmission belt wear, tighten loose connectors and test fault alarm function
Monthly Maintenance
Deep clean internal scrap accumulation, lubricate transmission parts, replace severely worn band knives timely
Repair Rules
Troubleshoot according to touch screen alarm prompts; cut off power before disassembly; replace aging band knife regularly to guarantee splitting precision
Heavy Duty Four Column Hydraulic Gantry Die Cutting Machine
Model: BS-400 / BS-600
Specification BS-400 BS-600 Effective Splitting Width 400 mm 600 mm Splitting Precision ±0.02 mm uniform thickness ±0.02 mm uniform thickness Splitting Thickness Range 0.1–8 mm adjustable 0.1–8 mm adjustable Cutting System Imported endless band knife, stable cutting Imported endless band knife, stable cutting Control System PLC closed-loop digital control system PLC closed-loop digital control system Operation Panel Touch screen Touch screen Feeding Structure Rubber anti-slip feeding roller, automatic feeding Rubber anti-slip feeding roller, automatic feeding Applicable Materials Genuine leather, synthetic leather, EVA, rubber, foam, shoe composite Genuine leather, synthetic leather, EVA, rubber, foam, shoe composite Speed Control 0–20 m/min stepless adjustable feeding speed 0–20 m/min stepless adjustable feeding speed Working Power 2.2 KW 3.0 KW Working Voltage AC220V 50Hz AC220V 50Hz Grinding Device Automatic knife sharpening mechanism Automatic knife sharpening mechanism Machine Size (L×W×H) 1480×920×1360mm 1720×1050×1420mm Wooden Box Size (L×W×H) 1580×1020×1460mm 1820×1150×1520mm Net Weight 420 KG 530 KG Gross Weight 470 KG 590 KG
Key Machine Features
· PLC digital control + bilingual touch screen, parameter quick setting
· ±0.02mm ultra-precise splitting, consistent thinness for whole material
· Automatic cycle knife sharpening, keep band knife sharp for long-term use
· Stepless adjustable feeding speed, match soft leather and hard rubber/EVA
· Anti-slip compression feeding roller, no material sliding during splitting
· Closed-loop thickness adjustment, one-key save common processing parameters
· Integrated thick cast iron frame, low vibration and stable long-hour running
· Built-in dust and scrap collection box, easy to clean leather shavings
· Fast band knife replacement structure, reduce downtime for part replacement
· Overload automatic stop protection to prevent knife and motor damage
Application Fields
This PLC Band Knife Splitting Machine serves high-end shoe factories, leather goods processing plants, foam and rubber material pretreatment workshops. It evenly thins genuine leather, synthetic leather, EVA midsoles, rubber outsoles and composite shoe materials for shoe upper, insole and outsole pre-processing.
Ideal for sports shoes, casual shoes, leather dress shoes and kids shoe material thinning. Adjustable splitting thickness and feeding speed adapt to materials of different hardness, delivering uniform thin raw materials to meet high-standard shoemaking production requirements.
Operation Guidance
Check power supply, band knife tightness and grinding device before startup
Set target splitting thickness and feeding speed via touch screen according to material
Test split small material samples to verify thickness accuracy before mass processing
Place leather/EVA flat on feeding table, equipment feeds and splits automatically
Collect leather scraps, clean internal roller and shut down machine after daily work
Installation Guidance
Place machine on flat reinforced ground, fix anchor bolts for stable placement
Connect AC220V 50Hz power supply with reliable grounding wire
Fill standard hydraulic oil and install cutting dies following operation manual
Run 5–10 minutes no-load test, finish cutting debugging with raw shoe materials
Maintenance & Repair Instructions
Daily Maintenance
Clean leather shavings and surface dust; check band knife sharpness and roller tightness
Weekly Maintenance
Inspect transmission belt wear, tighten loose connectors and test fault alarm function
Monthly Maintenance
Deep clean internal scrap accumulation, lubricate transmission parts, replace severely worn band knives timely
Repair Rules
Troubleshoot according to touch screen alarm prompts; cut off power before disassembly; replace aging band knife regularly to guarantee splitting precision
Heavy Duty Four Column Hydraulic Gantry Die Cutting Machine
Model: BS-400 / BS-600
Specification BS-400 BS-600 Effective Splitting Width 400 mm 600 mm Splitting Precision ±0.02 mm uniform thickness ±0.02 mm uniform thickness Splitting Thickness Range 0.1–8 mm adjustable 0.1–8 mm adjustable Cutting System Imported endless band knife, stable cutting Imported endless band knife, stable cutting Control System PLC closed-loop digital control system PLC closed-loop digital control system Operation Panel Touch screen Touch screen Feeding Structure Rubber anti-slip feeding roller, automatic feeding Rubber anti-slip feeding roller, automatic feeding Applicable Materials Genuine leather, synthetic leather, EVA, rubber, foam, shoe composite Genuine leather, synthetic leather, EVA, rubber, foam, shoe composite Speed Control 0–20 m/min stepless adjustable feeding speed 0–20 m/min stepless adjustable feeding speed Working Power 2.2 KW 3.0 KW Working Voltage AC220V 50Hz AC220V 50Hz Grinding Device Automatic knife sharpening mechanism Automatic knife sharpening mechanism Machine Size (L×W×H) 1480×920×1360mm 1720×1050×1420mm Wooden Box Size (L×W×H) 1580×1020×1460mm 1820×1150×1520mm Net Weight 420 KG 530 KG Gross Weight 470 KG 590 KG
Key Machine Features
· PLC digital control + bilingual touch screen, parameter quick setting
· ±0.02mm ultra-precise splitting, consistent thinness for whole material
· Automatic cycle knife sharpening, keep band knife sharp for long-term use
· Stepless adjustable feeding speed, match soft leather and hard rubber/EVA
· Anti-slip compression feeding roller, no material sliding during splitting
· Closed-loop thickness adjustment, one-key save common processing parameters
· Integrated thick cast iron frame, low vibration and stable long-hour running
· Built-in dust and scrap collection box, easy to clean leather shavings
· Fast band knife replacement structure, reduce downtime for part replacement
· Overload automatic stop protection to prevent knife and motor damage
Application Fields
This PLC Band Knife Splitting Machine serves high-end shoe factories, leather goods processing plants, foam and rubber material pretreatment workshops. It evenly thins genuine leather, synthetic leather, EVA midsoles, rubber outsoles and composite shoe materials for shoe upper, insole and outsole pre-processing.
Ideal for sports shoes, casual shoes, leather dress shoes and kids shoe material thinning. Adjustable splitting thickness and feeding speed adapt to materials of different hardness, delivering uniform thin raw materials to meet high-standard shoemaking production requirements.
Operation Guidance
Check power supply, band knife tightness and grinding device before startup
Set target splitting thickness and feeding speed via touch screen according to material
Test split small material samples to verify thickness accuracy before mass processing
Place leather/EVA flat on feeding table, equipment feeds and splits automatically
Collect leather scraps, clean internal roller and shut down machine after daily work
Installation Guidance
Place machine on flat reinforced ground, fix anchor bolts for stable placement
Connect AC220V 50Hz power supply with reliable grounding wire
Fill standard hydraulic oil and install cutting dies following operation manual
Run 5–10 minutes no-load test, finish cutting debugging with raw shoe materials
Maintenance & Repair Instructions
Daily Maintenance
Clean leather shavings and surface dust; check band knife sharpness and roller tightness
Weekly Maintenance
Inspect transmission belt wear, tighten loose connectors and test fault alarm function
Monthly Maintenance
Deep clean internal scrap accumulation, lubricate transmission parts, replace severely worn band knives timely
Repair Rules
Troubleshoot according to touch screen alarm prompts; cut off power before disassembly; replace aging band knife regularly to guarantee splitting precision
Heavy Duty Four Column Hydraulic Gantry Die Cutting Machine
Model: BS-400 / BS-600
Specification BS-400 BS-600 Effective Splitting Width 400 mm 600 mm Splitting Precision ±0.02 mm uniform thickness ±0.02 mm uniform thickness Splitting Thickness Range 0.1–8 mm adjustable 0.1–8 mm adjustable Cutting System Imported endless band knife, stable cutting Imported endless band knife, stable cutting Control System PLC closed-loop digital control system PLC closed-loop digital control system Operation Panel Touch screen Touch screen Feeding Structure Rubber anti-slip feeding roller, automatic feeding Rubber anti-slip feeding roller, automatic feeding Applicable Materials Genuine leather, synthetic leather, EVA, rubber, foam, shoe composite Genuine leather, synthetic leather, EVA, rubber, foam, shoe composite Speed Control 0–20 m/min stepless adjustable feeding speed 0–20 m/min stepless adjustable feeding speed Working Power 2.2 KW 3.0 KW Working Voltage AC220V 50Hz AC220V 50Hz Grinding Device Automatic knife sharpening mechanism Automatic knife sharpening mechanism Machine Size (L×W×H) 1480×920×1360mm 1720×1050×1420mm Wooden Box Size (L×W×H) 1580×1020×1460mm 1820×1150×1520mm Net Weight 420 KG 530 KG Gross Weight 470 KG 590 KG
Key Machine Features
· PLC digital control + bilingual touch screen, parameter quick setting
· ±0.02mm ultra-precise splitting, consistent thinness for whole material
· Automatic cycle knife sharpening, keep band knife sharp for long-term use
· Stepless adjustable feeding speed, match soft leather and hard rubber/EVA
· Anti-slip compression feeding roller, no material sliding during splitting
· Closed-loop thickness adjustment, one-key save common processing parameters
· Integrated thick cast iron frame, low vibration and stable long-hour running
· Built-in dust and scrap collection box, easy to clean leather shavings
· Fast band knife replacement structure, reduce downtime for part replacement
· Overload automatic stop protection to prevent knife and motor damage
Application Fields
This PLC Band Knife Splitting Machine serves high-end shoe factories, leather goods processing plants, foam and rubber material pretreatment workshops. It evenly thins genuine leather, synthetic leather, EVA midsoles, rubber outsoles and composite shoe materials for shoe upper, insole and outsole pre-processing.
Ideal for sports shoes, casual shoes, leather dress shoes and kids shoe material thinning. Adjustable splitting thickness and feeding speed adapt to materials of different hardness, delivering uniform thin raw materials to meet high-standard shoemaking production requirements.
Operation Guidance
Check power supply, band knife tightness and grinding device before startup
Set target splitting thickness and feeding speed via touch screen according to material
Test split small material samples to verify thickness accuracy before mass processing
Place leather/EVA flat on feeding table, equipment feeds and splits automatically
Collect leather scraps, clean internal roller and shut down machine after daily work
Installation Guidance
Place machine on flat reinforced ground, fix anchor bolts for stable placement
Connect AC220V 50Hz power supply with reliable grounding wire
Fill standard hydraulic oil and install cutting dies following operation manual
Run 5–10 minutes no-load test, finish cutting debugging with raw shoe materials
Maintenance & Repair Instructions
Daily Maintenance
Clean leather shavings and surface dust; check band knife sharpness and roller tightness
Weekly Maintenance
Inspect transmission belt wear, tighten loose connectors and test fault alarm function
Monthly Maintenance
Deep clean internal scrap accumulation, lubricate transmission parts, replace severely worn band knives timely
Repair Rules
Troubleshoot according to touch screen alarm prompts; cut off power before disassembly; replace aging band knife regularly to guarantee splitting precision
Heavy Duty Four Column Hydraulic Gantry Die Cutting Machine
Model: BS-400 / BS-600
Specification BS-400 BS-600 Effective Splitting Width 400 mm 600 mm Splitting Precision ±0.02 mm uniform thickness ±0.02 mm uniform thickness Splitting Thickness Range 0.1–8 mm adjustable 0.1–8 mm adjustable Cutting System Imported endless band knife, stable cutting Imported endless band knife, stable cutting Control System PLC closed-loop digital control system PLC closed-loop digital control system Operation Panel Touch screen Touch screen Feeding Structure Rubber anti-slip feeding roller, automatic feeding Rubber anti-slip feeding roller, automatic feeding Applicable Materials Genuine leather, synthetic leather, EVA, rubber, foam, shoe composite Genuine leather, synthetic leather, EVA, rubber, foam, shoe composite Speed Control 0–20 m/min stepless adjustable feeding speed 0–20 m/min stepless adjustable feeding speed Working Power 2.2 KW 3.0 KW Working Voltage AC220V 50Hz AC220V 50Hz Grinding Device Automatic knife sharpening mechanism Automatic knife sharpening mechanism Machine Size (L×W×H) 1480×920×1360mm 1720×1050×1420mm Wooden Box Size (L×W×H) 1580×1020×1460mm 1820×1150×1520mm Net Weight 420 KG 530 KG Gross Weight 470 KG 590 KG
Key Machine Features
· PLC digital control + bilingual touch screen, parameter quick setting
· ±0.02mm ultra-precise splitting, consistent thinness for whole material
· Automatic cycle knife sharpening, keep band knife sharp for long-term use
· Stepless adjustable feeding speed, match soft leather and hard rubber/EVA
· Anti-slip compression feeding roller, no material sliding during splitting
· Closed-loop thickness adjustment, one-key save common processing parameters
· Integrated thick cast iron frame, low vibration and stable long-hour running
· Built-in dust and scrap collection box, easy to clean leather shavings
· Fast band knife replacement structure, reduce downtime for part replacement
· Overload automatic stop protection to prevent knife and motor damage
Application Fields
This PLC Band Knife Splitting Machine serves high-end shoe factories, leather goods processing plants, foam and rubber material pretreatment workshops. It evenly thins genuine leather, synthetic leather, EVA midsoles, rubber outsoles and composite shoe materials for shoe upper, insole and outsole pre-processing.
Ideal for sports shoes, casual shoes, leather dress shoes and kids shoe material thinning. Adjustable splitting thickness and feeding speed adapt to materials of different hardness, delivering uniform thin raw materials to meet high-standard shoemaking production requirements.
Operation Guidance
Check power supply, band knife tightness and grinding device before startup
Set target splitting thickness and feeding speed via touch screen according to material
Test split small material samples to verify thickness accuracy before mass processing
Place leather/EVA flat on feeding table, equipment feeds and splits automatically
Collect leather scraps, clean internal roller and shut down machine after daily work
Installation Guidance
Place machine on flat reinforced ground, fix anchor bolts for stable placement
Connect AC220V 50Hz power supply with reliable grounding wire
Fill standard hydraulic oil and install cutting dies following operation manual
Run 5–10 minutes no-load test, finish cutting debugging with raw shoe materials
Maintenance & Repair Instructions
Heavy Duty Four Column Hydraulic Gantry Die Cutting Machine
Model: BS-400 / BS-600
| Specification | BS-400 | BS-600 |
|---|---|---|
| Effective Splitting Width | 400 mm | 600 mm |
| Splitting Precision | ±0.02 mm uniform thickness | ±0.02 mm uniform thickness |
| Splitting Thickness Range | 0.1–8 mm adjustable | 0.1–8 mm adjustable |
| Cutting System | Imported endless band knife, stable cutting | Imported endless band knife, stable cutting |
| Control System | PLC closed-loop digital control system | PLC closed-loop digital control system |
| Operation Panel | Touch screen | Touch screen |
| Feeding Structure | Rubber anti-slip feeding roller, automatic feeding | Rubber anti-slip feeding roller, automatic feeding |
| Applicable Materials | Genuine leather, synthetic leather, EVA, rubber, foam, shoe composite | Genuine leather, synthetic leather, EVA, rubber, foam, shoe composite |
| Speed Control | 0–20 m/min stepless adjustable feeding speed | 0–20 m/min stepless adjustable feeding speed |
| Working Power | 2.2 KW | 3.0 KW |
| Working Voltage | AC220V 50Hz | AC220V 50Hz |
| Grinding Device | Automatic knife sharpening mechanism | Automatic knife sharpening mechanism |
| Machine Size (L×W×H) | 1480×920×1360mm | 1720×1050×1420mm |
| Wooden Box Size (L×W×H) | 1580×1020×1460mm | 1820×1150×1520mm |
| Net Weight | 420 KG | 530 KG |
| Gross Weight | 470 KG | 590 KG |
Key Machine Features
· PLC digital control + bilingual touch screen, parameter quick setting
· ±0.02mm ultra-precise splitting, consistent thinness for whole material
· Automatic cycle knife sharpening, keep band knife sharp for long-term use
· Stepless adjustable feeding speed, match soft leather and hard rubber/EVA
· Anti-slip compression feeding roller, no material sliding during splitting
· Closed-loop thickness adjustment, one-key save common processing parameters
· Integrated thick cast iron frame, low vibration and stable long-hour running
· Built-in dust and scrap collection box, easy to clean leather shavings
· Fast band knife replacement structure, reduce downtime for part replacement
· Overload automatic stop protection to prevent knife and motor damage
Application Fields
This PLC Band Knife Splitting Machine serves high-end shoe factories, leather goods processing plants, foam and rubber material pretreatment workshops. It evenly thins genuine leather, synthetic leather, EVA midsoles, rubber outsoles and composite shoe materials for shoe upper, insole and outsole pre-processing.
Ideal for sports shoes, casual shoes, leather dress shoes and kids shoe material thinning. Adjustable splitting thickness and feeding speed adapt to materials of different hardness, delivering uniform thin raw materials to meet high-standard shoemaking production requirements.
Operation Guidance
Installation Guidance
Maintenance & Repair InstructionsDaily Maintenance
Clean leather shavings and surface dust; check band knife sharpness and roller tightness
Weekly Maintenance
Inspect transmission belt wear, tighten loose connectors and test fault alarm function
Monthly Maintenance
Deep clean internal scrap accumulation, lubricate transmission parts, replace severely worn band knives timely
Repair Rules
Troubleshoot according to touch screen alarm prompts; cut off power before disassembly; replace aging band knife regularly to guarantee splitting precision
