Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole
Model:ETPU-05 / ETPU-08
Specification ETPU-05 Low Density Grade ETPU-08 High Rebound Grade Single Particle Diameter 4–6 mm 7–9 mm Particle Density 0.05 g/cm³ 0.08 g/cm³ Material Supercritical physical foamed thermoplastic polyurethane Supercritical physical foamed thermoplastic polyurethane Color Off-white porous spherical pellet Off-white porous spherical pellet Rebound Rate ≥ 60% ≥ 70% Compression Set ≤ 25% ≤ 18% Heat Resistance -20℃ ~ 80℃ stable performance -20℃ ~ 80℃ stable performance Packing Form 25kg moisture-proof woven bag with inner PE liner 25kg moisture-proof woven bag with inner PE liner Bulk Weight Per Bag 25 KG net weight 25 KG net weight Carton/Bag Dimensions 700×450×180 mm 700×450×200 mm Gross Weight Per Bag 26.2 KG 26.5 KG
Key Product Features
Produced via supercritical CO₂ physical foaming, no chemical foaming agent residue, meets footwear environmental protection standards
Uniform porous internal structure, lightweight with outstanding shock absorption and energy return performance
Excellent compression recovery, long-term repeated foot loading will not cause permanent collapse of shoe midsole
Good low and high temperature tolerance, rebound performance stays stable in different seasonal use scenarios
Firm inter-particle fusion during mould hot pressing, less delamination risk for finished midsole blanks
Consistent particle size and density in each batch, stable molding shrinkage rate for mass shoe production
Low water absorption, effectively reduces midsole weight gain after rainy day wetting
Outstanding fatigue resistance, adapts to long-distance running and daily high-frequency walking wear
Can be blended with different density grades to adjust midsole hardness for diversified shoe design demands
Clean raw material without impurities, lowers defective rate during injection and hot press molding Application Fields
These E-TPU popcorn pellets are supplied to footwear material factories, midsole molding workshops, sports shoe brands and shoe R&D laboratories. Mainly used for compression molding of running shoe, casual sneaker and training shoe midsoles; also applicable for shock-absorbing insoles, sport protective padding and other elastic footwear components. Two density grades satisfy lightweight soft midsole and high-rebound performance midsole development respectively.
Operation Guidance
Keep pellets sealed before processing to avoid moisture absorption from humid air
Match hot pressing temperature, pressure and holding time according to selected density grade
Spread pellets evenly inside mould cavity to ensure uniform density of finished midsole
Cool molded parts fully under pressure before demoulding to reduce deformation
Store unused pellets in sealed moisture-proof packaging after production Storage Guidance
Stock in dry, ventilated warehouse with relative humidity below 65%
Keep away from direct sunlight, heat sources and oily corrosive substances
Stack bagged goods no more than 8 layers high to prevent particle crushing by heavy pressure

Maintenance Instructions
Daily Check
Inspect package sealing condition, confirm no dampness or particle caking
Monthly Inspection
Sample check particle looseness; avoid long storage over 12 months for best molding effect
Usage Note
Do not mix E-TPU pellets with other plastic granules without formula test
Recycling Reminder
Defective molded midsole scraps can be recycled for secondary granulation with professional equipment
Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole
Model:ETPU-05 / ETPU-08
Specification ETPU-05 Low Density Grade ETPU-08 High Rebound Grade Single Particle Diameter 4–6 mm 7–9 mm Particle Density 0.05 g/cm³ 0.08 g/cm³ Material Supercritical physical foamed thermoplastic polyurethane Supercritical physical foamed thermoplastic polyurethane Color Off-white porous spherical pellet Off-white porous spherical pellet Rebound Rate ≥ 60% ≥ 70% Compression Set ≤ 25% ≤ 18% Heat Resistance -20℃ ~ 80℃ stable performance -20℃ ~ 80℃ stable performance Packing Form 25kg moisture-proof woven bag with inner PE liner 25kg moisture-proof woven bag with inner PE liner Bulk Weight Per Bag 25 KG net weight 25 KG net weight Carton/Bag Dimensions 700×450×180 mm 700×450×200 mm Gross Weight Per Bag 26.2 KG 26.5 KG
Key Product Features
Produced via supercritical CO₂ physical foaming, no chemical foaming agent residue, meets footwear environmental protection standards
Uniform porous internal structure, lightweight with outstanding shock absorption and energy return performance
Excellent compression recovery, long-term repeated foot loading will not cause permanent collapse of shoe midsole
Good low and high temperature tolerance, rebound performance stays stable in different seasonal use scenarios
Firm inter-particle fusion during mould hot pressing, less delamination risk for finished midsole blanks
Consistent particle size and density in each batch, stable molding shrinkage rate for mass shoe production
Low water absorption, effectively reduces midsole weight gain after rainy day wetting
Outstanding fatigue resistance, adapts to long-distance running and daily high-frequency walking wear
Can be blended with different density grades to adjust midsole hardness for diversified shoe design demands
Clean raw material without impurities, lowers defective rate during injection and hot press molding Application Fields
These E-TPU popcorn pellets are supplied to footwear material factories, midsole molding workshops, sports shoe brands and shoe R&D laboratories. Mainly used for compression molding of running shoe, casual sneaker and training shoe midsoles; also applicable for shock-absorbing insoles, sport protective padding and other elastic footwear components. Two density grades satisfy lightweight soft midsole and high-rebound performance midsole development respectively.
Operation Guidance
Keep pellets sealed before processing to avoid moisture absorption from humid air
Match hot pressing temperature, pressure and holding time according to selected density grade
Spread pellets evenly inside mould cavity to ensure uniform density of finished midsole
Cool molded parts fully under pressure before demoulding to reduce deformation
Store unused pellets in sealed moisture-proof packaging after production Storage Guidance
Stock in dry, ventilated warehouse with relative humidity below 65%
Keep away from direct sunlight, heat sources and oily corrosive substances
Stack bagged goods no more than 8 layers high to prevent particle crushing by heavy pressure

Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole
Model:ETPU-05 / ETPU-08
| Specification | ETPU-05 Low Density Grade | ETPU-08 High Rebound Grade |
|---|---|---|
| Single Particle Diameter | 4–6 mm | 7–9 mm |
| Particle Density | 0.05 g/cm³ | 0.08 g/cm³ |
| Material | Supercritical physical foamed thermoplastic polyurethane | Supercritical physical foamed thermoplastic polyurethane |
| Color | Off-white porous spherical pellet | Off-white porous spherical pellet |
| Rebound Rate | ≥ 60% | ≥ 70% |
| Compression Set | ≤ 25% | ≤ 18% |
| Heat Resistance | -20℃ ~ 80℃ stable performance | -20℃ ~ 80℃ stable performance |
| Packing Form | 25kg moisture-proof woven bag with inner PE liner | 25kg moisture-proof woven bag with inner PE liner |
| Bulk Weight Per Bag | 25 KG net weight | 25 KG net weight |
| Carton/Bag Dimensions | 700×450×180 mm | 700×450×200 mm |
| Gross Weight Per Bag | 26.2 KG | 26.5 KG |
Key Product Features
Application Fields
These E-TPU popcorn pellets are supplied to footwear material factories, midsole molding workshops, sports shoe brands and shoe R&D laboratories. Mainly used for compression molding of running shoe, casual sneaker and training shoe midsoles; also applicable for shock-absorbing insoles, sport protective padding and other elastic footwear components. Two density grades satisfy lightweight soft midsole and high-rebound performance midsole development respectively.
Operation Guidance
Storage Guidance

Maintenance Instructions
Daily Check
Inspect package sealing condition, confirm no dampness or particle caking
Monthly Inspection
Sample check particle looseness; avoid long storage over 12 months for best molding effect
Usage Note
Do not mix E-TPU pellets with other plastic granules without formula test
Recycling Reminder
Defective molded midsole scraps can be recycled for secondary granulation with professional equipment



