Polyester Nonwoven Interlining For Shoe Making, Nonwoven Base Liner For Hot Melt Toe Puff Heel Counter & Shoe Inner Lining
Model:NW-PET-SHOE
Specification Parameter Details Raw Material 100% Polyester staple fiber non-woven fabric Standard Roll Width 1370mm Roll Length 100m per roll Grammage Options 80g/㎡ / 100g/㎡ / 120g/㎡ / 150g/㎡ Appearance Uniform white fluffy nonwoven, no loose fiber shedding Single Roll Net Weight 13.2 KG (100g/㎡ benchmark grammage) Packaging Each roll fully wrapped with waterproof PE protective film Quantity Per Export Carton 4 rolls Carton Dimension (L×W×H) 1440×400×330 mm Carton Net Weight 52.8 KG Carton Gross Weight 58.2 KG
Key ProductFeatures
Made of pure polyester fiber nonwoven, uniform fiber distribution, stable fluff-locking structure, effectively avoids loose fiber shedding during cutting and hot pressing.
Good heat resistance and thermal compounding performance, perfectly matched with TPU hot melt adhesive film for hot melt toe puff and heel counter composite molding, strong bonding without separation.
Moderate stiffness and softness, provides stable supporting performance for shoe toe and heel shaping, prevents collapse; soft texture is comfortable for shoe inner lining, no hard friction on feet.
Excellent tensile and tear strength, no breakage during stretching, die-cutting and sewing processes, greatly reduces production waste and defective rate.
Stable grammage and thickness across all batches, uniform shrinkage rate, fully compatible with automated cutting, continuous hot pressing and high-speed sewing shoemaking assembly lines.
Application Fields
This polyester nonwoven shoe interlining is widely supplied to sneaker factories, casual shoe manufacturers, labor safety footwear plants and shoe material wholesale distributors, with two core application directions:
Base substrate for hot melt toe puff & heel counter: Compound with TPU hot melt film by hot pressing to form shaping support sheet for shoe toe and heel, maintain three-dimensional shoe outline and prevent collapse.
Shoe inner lining auxiliary liner: Used as inner lining backing layer for all kinds of sports shoes, dad shoes, skate sneakers and casual fashion shoes, improve lining flatness and wear comfort.
Operation Guidance
- Unroll the nonwoven fabric flat and release winding tension before layout marking and die cutting.
- Test hot pressing compound parameters (temperature, pressure, time) with matched TPU hot melt film before mass production to ensure tight composite without bubbling.
- Avoid excessive stretching of nonwoven cloth during sewing and laminating to prevent finished shoe lining deformation.
- Seal leftover roll ends with waterproof PE film timely after daily processing to prevent dust and moisture contamination.
StorageGuidance
- Store nonwoven rolls horizontally on flat storage racks in cool, dry and ventilated warehouse, keep ambient storage temperature below 35℃.
- Keep away from high-temperature heat sources, direct sunlight, oil stains and corrosive solvents to prevent fiber aging, hardening and discoloration.
- Avoid heavy vertical stacking on fabric rolls to prevent fluffy fiber layer permanent compression hardening.
- Keep roll packaging film tightly sealed after partial use to prevent dust adsorption affecting subsequent hot melt composite bonding effect.
Maintenance Instructions
Daily Maintenance
Check packaging sealing integrity, fabric surface cleanliness and fiber shedding condition before cutting processing.
BatchInspection
Spot-check fabric grammage uniformity, tensile tear resistance and hot melt composite compatibility for incoming rolls.
Usage Precaution
Control hot pressing temperature reasonably, excessive high temperature will cause fiber shrinkage and affect shaping effect.
Recycling Reminder
Cutting leftover polyester nonwoven scraps can be collected centrally for recycled polyester fiber reprocessing.
Polyester Nonwoven Interlining For Shoe Making, Nonwoven Base Liner For Hot Melt Toe Puff Heel Counter & Shoe Inner Lining
Model:NW-PET-SHOE
Specification Parameter Details Raw Material 100% Polyester staple fiber non-woven fabric Standard Roll Width 1370mm Roll Length 100m per roll Grammage Options 80g/㎡ / 100g/㎡ / 120g/㎡ / 150g/㎡ Appearance Uniform white fluffy nonwoven, no loose fiber shedding Single Roll Net Weight 13.2 KG (100g/㎡ benchmark grammage) Packaging Each roll fully wrapped with waterproof PE protective film Quantity Per Export Carton 4 rolls Carton Dimension (L×W×H) 1440×400×330 mm Carton Net Weight 52.8 KG Carton Gross Weight 58.2 KG
Key ProductFeatures
Made of pure polyester fiber nonwoven, uniform fiber distribution, stable fluff-locking structure, effectively avoids loose fiber shedding during cutting and hot pressing.
Good heat resistance and thermal compounding performance, perfectly matched with TPU hot melt adhesive film for hot melt toe puff and heel counter composite molding, strong bonding without separation.
Moderate stiffness and softness, provides stable supporting performance for shoe toe and heel shaping, prevents collapse; soft texture is comfortable for shoe inner lining, no hard friction on feet.
Excellent tensile and tear strength, no breakage during stretching, die-cutting and sewing processes, greatly reduces production waste and defective rate.
Stable grammage and thickness across all batches, uniform shrinkage rate, fully compatible with automated cutting, continuous hot pressing and high-speed sewing shoemaking assembly lines.
Application Fields
This polyester nonwoven shoe interlining is widely supplied to sneaker factories, casual shoe manufacturers, labor safety footwear plants and shoe material wholesale distributors, with two core application directions:
Base substrate for hot melt toe puff & heel counter: Compound with TPU hot melt film by hot pressing to form shaping support sheet for shoe toe and heel, maintain three-dimensional shoe outline and prevent collapse.
Shoe inner lining auxiliary liner: Used as inner lining backing layer for all kinds of sports shoes, dad shoes, skate sneakers and casual fashion shoes, improve lining flatness and wear comfort.
Operation Guidance
- Unroll the nonwoven fabric flat and release winding tension before layout marking and die cutting.
- Test hot pressing compound parameters (temperature, pressure, time) with matched TPU hot melt film before mass production to ensure tight composite without bubbling.
- Avoid excessive stretching of nonwoven cloth during sewing and laminating to prevent finished shoe lining deformation.
- Seal leftover roll ends with waterproof PE film timely after daily processing to prevent dust and moisture contamination.
StorageGuidance
- Store nonwoven rolls horizontally on flat storage racks in cool, dry and ventilated warehouse, keep ambient storage temperature below 35℃.
- Keep away from high-temperature heat sources, direct sunlight, oil stains and corrosive solvents to prevent fiber aging, hardening and discoloration.
- Avoid heavy vertical stacking on fabric rolls to prevent fluffy fiber layer permanent compression hardening.
- Keep roll packaging film tightly sealed after partial use to prevent dust adsorption affecting subsequent hot melt composite bonding effect.
Maintenance Instructions
Daily Maintenance
Check packaging sealing integrity, fabric surface cleanliness and fiber shedding condition before cutting processing.
BatchInspection
Spot-check fabric grammage uniformity, tensile tear resistance and hot melt composite compatibility for incoming rolls.
Usage Precaution
Control hot pressing temperature reasonably, excessive high temperature will cause fiber shrinkage and affect shaping effect.
Recycling Reminder
Cutting leftover polyester nonwoven scraps can be collected centrally for recycled polyester fiber reprocessing.
Polyester Nonwoven Interlining For Shoe Making, Nonwoven Base Liner For Hot Melt Toe Puff Heel Counter & Shoe Inner Lining
Model:NW-PET-SHOE
Specification Parameter Details Raw Material 100% Polyester staple fiber non-woven fabric Standard Roll Width 1370mm Roll Length 100m per roll Grammage Options 80g/㎡ / 100g/㎡ / 120g/㎡ / 150g/㎡ Appearance Uniform white fluffy nonwoven, no loose fiber shedding Single Roll Net Weight 13.2 KG (100g/㎡ benchmark grammage) Packaging Each roll fully wrapped with waterproof PE protective film Quantity Per Export Carton 4 rolls Carton Dimension (L×W×H) 1440×400×330 mm Carton Net Weight 52.8 KG Carton Gross Weight 58.2 KG
Key ProductFeatures
Made of pure polyester fiber nonwoven, uniform fiber distribution, stable fluff-locking structure, effectively avoids loose fiber shedding during cutting and hot pressing.
Good heat resistance and thermal compounding performance, perfectly matched with TPU hot melt adhesive film for hot melt toe puff and heel counter composite molding, strong bonding without separation.
Moderate stiffness and softness, provides stable supporting performance for shoe toe and heel shaping, prevents collapse; soft texture is comfortable for shoe inner lining, no hard friction on feet.
Excellent tensile and tear strength, no breakage during stretching, die-cutting and sewing processes, greatly reduces production waste and defective rate.
Stable grammage and thickness across all batches, uniform shrinkage rate, fully compatible with automated cutting, continuous hot pressing and high-speed sewing shoemaking assembly lines.
Application Fields
This polyester nonwoven shoe interlining is widely supplied to sneaker factories, casual shoe manufacturers, labor safety footwear plants and shoe material wholesale distributors, with two core application directions:
Base substrate for hot melt toe puff & heel counter: Compound with TPU hot melt film by hot pressing to form shaping support sheet for shoe toe and heel, maintain three-dimensional shoe outline and prevent collapse.
Shoe inner lining auxiliary liner: Used as inner lining backing layer for all kinds of sports shoes, dad shoes, skate sneakers and casual fashion shoes, improve lining flatness and wear comfort.
Operation Guidance
- Unroll the nonwoven fabric flat and release winding tension before layout marking and die cutting.
- Test hot pressing compound parameters (temperature, pressure, time) with matched TPU hot melt film before mass production to ensure tight composite without bubbling.
- Avoid excessive stretching of nonwoven cloth during sewing and laminating to prevent finished shoe lining deformation.
- Seal leftover roll ends with waterproof PE film timely after daily processing to prevent dust and moisture contamination.
StorageGuidance
- Store nonwoven rolls horizontally on flat storage racks in cool, dry and ventilated warehouse, keep ambient storage temperature below 35℃.
- Keep away from high-temperature heat sources, direct sunlight, oil stains and corrosive solvents to prevent fiber aging, hardening and discoloration.
- Avoid heavy vertical stacking on fabric rolls to prevent fluffy fiber layer permanent compression hardening.
- Keep roll packaging film tightly sealed after partial use to prevent dust adsorption affecting subsequent hot melt composite bonding effect.
Maintenance Instructions
Daily Maintenance
Check packaging sealing integrity, fabric surface cleanliness and fiber shedding condition before cutting processing.
BatchInspection
Spot-check fabric grammage uniformity, tensile tear resistance and hot melt composite compatibility for incoming rolls.
Usage Precaution
Control hot pressing temperature reasonably, excessive high temperature will cause fiber shrinkage and affect shaping effect.
Recycling Reminder
Cutting leftover polyester nonwoven scraps can be collected centrally for recycled polyester fiber reprocessing.
Polyester Nonwoven Interlining For Shoe Making, Nonwoven Base Liner For Hot Melt Toe Puff Heel Counter & Shoe Inner Lining
Model:NW-PET-SHOE
Specification Parameter Details Raw Material 100% Polyester staple fiber non-woven fabric Standard Roll Width 1370mm Roll Length 100m per roll Grammage Options 80g/㎡ / 100g/㎡ / 120g/㎡ / 150g/㎡ Appearance Uniform white fluffy nonwoven, no loose fiber shedding Single Roll Net Weight 13.2 KG (100g/㎡ benchmark grammage) Packaging Each roll fully wrapped with waterproof PE protective film Quantity Per Export Carton 4 rolls Carton Dimension (L×W×H) 1440×400×330 mm Carton Net Weight 52.8 KG Carton Gross Weight 58.2 KG
Key ProductFeatures
Made of pure polyester fiber nonwoven, uniform fiber distribution, stable fluff-locking structure, effectively avoids loose fiber shedding during cutting and hot pressing.
Good heat resistance and thermal compounding performance, perfectly matched with TPU hot melt adhesive film for hot melt toe puff and heel counter composite molding, strong bonding without separation.
Moderate stiffness and softness, provides stable supporting performance for shoe toe and heel shaping, prevents collapse; soft texture is comfortable for shoe inner lining, no hard friction on feet.
Excellent tensile and tear strength, no breakage during stretching, die-cutting and sewing processes, greatly reduces production waste and defective rate.
Stable grammage and thickness across all batches, uniform shrinkage rate, fully compatible with automated cutting, continuous hot pressing and high-speed sewing shoemaking assembly lines.
Application Fields
This polyester nonwoven shoe interlining is widely supplied to sneaker factories, casual shoe manufacturers, labor safety footwear plants and shoe material wholesale distributors, with two core application directions:
Base substrate for hot melt toe puff & heel counter: Compound with TPU hot melt film by hot pressing to form shaping support sheet for shoe toe and heel, maintain three-dimensional shoe outline and prevent collapse.
Shoe inner lining auxiliary liner: Used as inner lining backing layer for all kinds of sports shoes, dad shoes, skate sneakers and casual fashion shoes, improve lining flatness and wear comfort.
Operation Guidance
- Unroll the nonwoven fabric flat and release winding tension before layout marking and die cutting.
- Test hot pressing compound parameters (temperature, pressure, time) with matched TPU hot melt film before mass production to ensure tight composite without bubbling.
- Avoid excessive stretching of nonwoven cloth during sewing and laminating to prevent finished shoe lining deformation.
- Seal leftover roll ends with waterproof PE film timely after daily processing to prevent dust and moisture contamination.
StorageGuidance
- Store nonwoven rolls horizontally on flat storage racks in cool, dry and ventilated warehouse, keep ambient storage temperature below 35℃.
- Keep away from high-temperature heat sources, direct sunlight, oil stains and corrosive solvents to prevent fiber aging, hardening and discoloration.
- Avoid heavy vertical stacking on fabric rolls to prevent fluffy fiber layer permanent compression hardening.
- Keep roll packaging film tightly sealed after partial use to prevent dust adsorption affecting subsequent hot melt composite bonding effect.
Maintenance Instructions
Daily Maintenance
Check packaging sealing integrity, fabric surface cleanliness and fiber shedding condition before cutting processing.
BatchInspection
Spot-check fabric grammage uniformity, tensile tear resistance and hot melt composite compatibility for incoming rolls.
Usage Precaution
Control hot pressing temperature reasonably, excessive high temperature will cause fiber shrinkage and affect shaping effect.
Recycling Reminder
Cutting leftover polyester nonwoven scraps can be collected centrally for recycled polyester fiber reprocessing.
Polyester Nonwoven Interlining For Shoe Making, Nonwoven Base Liner For Hot Melt Toe Puff Heel Counter & Shoe Inner Lining
Model:NW-PET-SHOE
Specification Parameter Details Raw Material 100% Polyester staple fiber non-woven fabric Standard Roll Width 1370mm Roll Length 100m per roll Grammage Options 80g/㎡ / 100g/㎡ / 120g/㎡ / 150g/㎡ Appearance Uniform white fluffy nonwoven, no loose fiber shedding Single Roll Net Weight 13.2 KG (100g/㎡ benchmark grammage) Packaging Each roll fully wrapped with waterproof PE protective film Quantity Per Export Carton 4 rolls Carton Dimension (L×W×H) 1440×400×330 mm Carton Net Weight 52.8 KG Carton Gross Weight 58.2 KG
Key ProductFeatures
Made of pure polyester fiber nonwoven, uniform fiber distribution, stable fluff-locking structure, effectively avoids loose fiber shedding during cutting and hot pressing.
Good heat resistance and thermal compounding performance, perfectly matched with TPU hot melt adhesive film for hot melt toe puff and heel counter composite molding, strong bonding without separation.
Moderate stiffness and softness, provides stable supporting performance for shoe toe and heel shaping, prevents collapse; soft texture is comfortable for shoe inner lining, no hard friction on feet.
Excellent tensile and tear strength, no breakage during stretching, die-cutting and sewing processes, greatly reduces production waste and defective rate.
Stable grammage and thickness across all batches, uniform shrinkage rate, fully compatible with automated cutting, continuous hot pressing and high-speed sewing shoemaking assembly lines.
Application Fields
This polyester nonwoven shoe interlining is widely supplied to sneaker factories, casual shoe manufacturers, labor safety footwear plants and shoe material wholesale distributors, with two core application directions:
Base substrate for hot melt toe puff & heel counter: Compound with TPU hot melt film by hot pressing to form shaping support sheet for shoe toe and heel, maintain three-dimensional shoe outline and prevent collapse.
Shoe inner lining auxiliary liner: Used as inner lining backing layer for all kinds of sports shoes, dad shoes, skate sneakers and casual fashion shoes, improve lining flatness and wear comfort.
Operation Guidance
- Unroll the nonwoven fabric flat and release winding tension before layout marking and die cutting.
- Test hot pressing compound parameters (temperature, pressure, time) with matched TPU hot melt film before mass production to ensure tight composite without bubbling.
- Avoid excessive stretching of nonwoven cloth during sewing and laminating to prevent finished shoe lining deformation.
- Seal leftover roll ends with waterproof PE film timely after daily processing to prevent dust and moisture contamination.
StorageGuidance
- Store nonwoven rolls horizontally on flat storage racks in cool, dry and ventilated warehouse, keep ambient storage temperature below 35℃.
- Keep away from high-temperature heat sources, direct sunlight, oil stains and corrosive solvents to prevent fiber aging, hardening and discoloration.
- Avoid heavy vertical stacking on fabric rolls to prevent fluffy fiber layer permanent compression hardening.
- Keep roll packaging film tightly sealed after partial use to prevent dust adsorption affecting subsequent hot melt composite bonding effect.
Maintenance Instructions
Polyester Nonwoven Interlining For Shoe Making, Nonwoven Base Liner For Hot Melt Toe Puff Heel Counter & Shoe Inner Lining
Model:NW-PET-SHOE
| Specification | Parameter Details |
|---|---|
| Raw Material | 100% Polyester staple fiber non-woven fabric |
| Standard Roll Width | 1370mm |
| Roll Length | 100m per roll |
| Grammage Options | 80g/㎡ / 100g/㎡ / 120g/㎡ / 150g/㎡ |
| Appearance | Uniform white fluffy nonwoven, no loose fiber shedding |
| Single Roll Net Weight | 13.2 KG (100g/㎡ benchmark grammage) |
| Packaging | Each roll fully wrapped with waterproof PE protective film |
| Quantity Per Export Carton | 4 rolls |
| Carton Dimension (L×W×H) | 1440×400×330 mm |
| Carton Net Weight | 52.8 KG |
| Carton Gross Weight | 58.2 KG |
Application Fields
This polyester nonwoven shoe interlining is widely supplied to sneaker factories, casual shoe manufacturers, labor safety footwear plants and shoe material wholesale distributors, with two core application directions:
Base substrate for hot melt toe puff & heel counter: Compound with TPU hot melt film by hot pressing to form shaping support sheet for shoe toe and heel, maintain three-dimensional shoe outline and prevent collapse.
Shoe inner lining auxiliary liner: Used as inner lining backing layer for all kinds of sports shoes, dad shoes, skate sneakers and casual fashion shoes, improve lining flatness and wear comfort.
Operation Guidance
- Unroll the nonwoven fabric flat and release winding tension before layout marking and die cutting.
- Test hot pressing compound parameters (temperature, pressure, time) with matched TPU hot melt film before mass production to ensure tight composite without bubbling.
- Avoid excessive stretching of nonwoven cloth during sewing and laminating to prevent finished shoe lining deformation.
- Seal leftover roll ends with waterproof PE film timely after daily processing to prevent dust and moisture contamination.
StorageGuidance
- Store nonwoven rolls horizontally on flat storage racks in cool, dry and ventilated warehouse, keep ambient storage temperature below 35℃.
- Keep away from high-temperature heat sources, direct sunlight, oil stains and corrosive solvents to prevent fiber aging, hardening and discoloration.
- Avoid heavy vertical stacking on fabric rolls to prevent fluffy fiber layer permanent compression hardening.
- Keep roll packaging film tightly sealed after partial use to prevent dust adsorption affecting subsequent hot melt composite bonding effect.
Maintenance InstructionsDaily Maintenance
Check packaging sealing integrity, fabric surface cleanliness and fiber shedding condition before cutting processing.
BatchInspection
Spot-check fabric grammage uniformity, tensile tear resistance and hot melt composite compatibility for incoming rolls.
Usage Precaution
Control hot pressing temperature reasonably, excessive high temperature will cause fiber shrinkage and affect shaping effect.
Recycling Reminder
Cutting leftover polyester nonwoven scraps can be collected centrally for recycled polyester fiber reprocessing.
