Essential details
Quantity(pieces):2
Volume:0.075852 m³
MOQ:2 pcs
G.W:64.3 kg
Lead time:15 working day
Size:L(126)*W(86)*H(7) cm
N.W:57.6 kg
Shipping:Express Delivery
Specification Number:1200mm×800mm; Custom cut-to-size available
Product Code:DC-RUBBER-PAD
Product Introduction
Die Cutting Rubber Pad For Shoe Making, Wear-resistant Cutting Press Board For Flyknit Fabric, Microfiber Leather, EVA Foam Blanking
Model:DC-RUBBER-PAD
Specification Parameter Details Core Material High density wear-resistant vulcanized rubber composite Standard Sheet Size 1200mm×800mm; Custom cut-to-size available Thickness Options 15mm / 20mm / 25mm / 30mm Surface Feature Matte dark green anti-slip texture, uniform compact internal structure Single Sheet Weight 28.8 KG (20mm benchmark thickness) Packaging Each rubber pad wrapped with dust-proof PE film, hard carton outer packaging Quantity Per Export Carton 2 pcs Carton Dimension (L×W×H) 1260×860×70 mm Carton Net Weight 57.6 KG Carton Gross Weight 64.3 KG
Key ProductFeatures
High-density vulcanized rubber raw material, ultra-high wear resistance, effectively resist repeated impact and cutting of steel die cutters, long service life, reduce frequent pad replacement cost for shoe factories.
Good elastic buffer performance, evenly disperse the pressure of hydraulic cutting machine during blanking, avoid knife mold collapse and material indentation, ensure neat and smooth cutting edges of flyknit fabric, microfiber leather, PU and EVA foam.
Compact internal structure without pores, no brittle cracking or chipping under long-time high-frequency stamping, no rubber debris mixed into shoe materials to cause defective products.
Matte dark green anti-slip surface texture, effectively prevent sliding displacement of raw materials and steel knife molds during high-speed cutting, improve cutting precision and production safety.
Stable hardness, moderate soft and hard balance, neither too hard to wear knife mold quickly nor too soft to cause material incomplete cutting; suitable for all common shoe raw material blanking work.
Customizable cutting size and thickness, support large whole sheet and small split sizes, adapt to different hydraulic cutting machine table sizes of small sample workshops and mass production shoe factories.
Low-odor environmental vulcanization formula, no pungent rubber odor, no harmful volatile substances, meet factory workshop environmental standards and export footwear supporting material safety requirements.
Flat uniform thickness of the whole plate, no warping, no concave-convex deformation, keep stable horizontal bearing during long-term continuous cutting operation.
Application Fields
This wear-resistant die cutting rubber pad is widely matched with hydraulic shoe cutting presses, used for blanking and stamping of all kinds of shoe raw materials: flyknit fabric, engineering mesh cloth, microfiber synthetic leather, suede PU, matte nubuck leather, EVA foam, non-woven interlining, hot melt adhesive film, insole materials, toe puff and heel counter sheets, etc. It is an essential supporting consumable for shoe material cutting workshops, sample development rooms and large-scale automated shoemaking production lines.
Operation Guidance
- Clean the metal worktable of the cutting machine thoroughly before laying the rubber pad, remove metal scraps, burrs and sundries to avoid scratching the bottom of the rubber plate.
- Place the rubber pad flat and centered on the cutting machine table, ensure no tilting or empty gaps under the plate to prevent uneven force during stamping.
- Adjust the cutting stroke pressure reasonably according to the thickness and hardness of the shoe material; avoid excessive instantaneous pressure leading to accelerated rubber pad wear.
- Regularly rotate the rubber pad left-right and front-back during daily use to make the wear uniform on the whole plate and extend overall service life.
- Clean rubber scraps and residual shoe materials on the pad surface after daily work, keep the surface smooth and clean to guarantee neat cutting edges of subsequent materials.
StorageGuidance
- Store rubber cutting pads flatly in cool, dry and ventilated warehouse, avoid long-term vertical leaning storage to prevent permanent warping deformation.
- Keep away from high-temperature heat sources, direct sunlight, oil stains, gasoline and corrosive chemical solvents, to prevent rubber aging, hardening, cracking and surface viscosity loss.
- Do not stack heavy metal objects, hard steel plates and sharp tools on the rubber pad to avoid surface indentation, scratch and internal structural damage.
- Keep the dust-proof PE packaging film wrapped when the rubber pad is temporarily unused, reduce long-term air oxidation aging speed.
Maintenance Instructions
Daily Maintenance
Clean surface rubber debris and residual shoe materials; check for deep cutting marks, cracks and surface damage.
Weekly Maintenance
Flip and rotate the rubber pad to balance wear position; wipe oil stains and dirt on the surface with neutral cleaning agent.
Monthly Maintenance
Comprehensively inspect the whole plate for aging cracking, serious groove wear; replace severely worn pads in time to avoid incomplete material cutting.
Usage Precaution
Sharp-edged steel knife molds are forbidden to slide and drag freely on the rubber pad surface to reduce artificial scratch damage.
Recycling Reminder
Worn waste rubber cutting pads can be recycled and reprocessed into industrial rubber raw materials for secondary utilization.
Die Cutting Rubber Pad For Shoe Making, Wear-resistant Cutting Press Board For Flyknit Fabric, Microfiber Leather, EVA Foam Blanking
Model:DC-RUBBER-PAD
Specification Parameter Details Core Material High density wear-resistant vulcanized rubber composite Standard Sheet Size 1200mm×800mm; Custom cut-to-size available Thickness Options 15mm / 20mm / 25mm / 30mm Surface Feature Matte dark green anti-slip texture, uniform compact internal structure Single Sheet Weight 28.8 KG (20mm benchmark thickness) Packaging Each rubber pad wrapped with dust-proof PE film, hard carton outer packaging Quantity Per Export Carton 2 pcs Carton Dimension (L×W×H) 1260×860×70 mm Carton Net Weight 57.6 KG Carton Gross Weight 64.3 KG
Key ProductFeatures
High-density vulcanized rubber raw material, ultra-high wear resistance, effectively resist repeated impact and cutting of steel die cutters, long service life, reduce frequent pad replacement cost for shoe factories.
Good elastic buffer performance, evenly disperse the pressure of hydraulic cutting machine during blanking, avoid knife mold collapse and material indentation, ensure neat and smooth cutting edges of flyknit fabric, microfiber leather, PU and EVA foam.
Compact internal structure without pores, no brittle cracking or chipping under long-time high-frequency stamping, no rubber debris mixed into shoe materials to cause defective products.
Matte dark green anti-slip surface texture, effectively prevent sliding displacement of raw materials and steel knife molds during high-speed cutting, improve cutting precision and production safety.
Stable hardness, moderate soft and hard balance, neither too hard to wear knife mold quickly nor too soft to cause material incomplete cutting; suitable for all common shoe raw material blanking work.
Customizable cutting size and thickness, support large whole sheet and small split sizes, adapt to different hydraulic cutting machine table sizes of small sample workshops and mass production shoe factories.
Low-odor environmental vulcanization formula, no pungent rubber odor, no harmful volatile substances, meet factory workshop environmental standards and export footwear supporting material safety requirements.
Flat uniform thickness of the whole plate, no warping, no concave-convex deformation, keep stable horizontal bearing during long-term continuous cutting operation.
Application Fields
This wear-resistant die cutting rubber pad is widely matched with hydraulic shoe cutting presses, used for blanking and stamping of all kinds of shoe raw materials: flyknit fabric, engineering mesh cloth, microfiber synthetic leather, suede PU, matte nubuck leather, EVA foam, non-woven interlining, hot melt adhesive film, insole materials, toe puff and heel counter sheets, etc. It is an essential supporting consumable for shoe material cutting workshops, sample development rooms and large-scale automated shoemaking production lines.
Operation Guidance
- Clean the metal worktable of the cutting machine thoroughly before laying the rubber pad, remove metal scraps, burrs and sundries to avoid scratching the bottom of the rubber plate.
- Place the rubber pad flat and centered on the cutting machine table, ensure no tilting or empty gaps under the plate to prevent uneven force during stamping.
- Adjust the cutting stroke pressure reasonably according to the thickness and hardness of the shoe material; avoid excessive instantaneous pressure leading to accelerated rubber pad wear.
- Regularly rotate the rubber pad left-right and front-back during daily use to make the wear uniform on the whole plate and extend overall service life.
- Clean rubber scraps and residual shoe materials on the pad surface after daily work, keep the surface smooth and clean to guarantee neat cutting edges of subsequent materials.
StorageGuidance
- Store rubber cutting pads flatly in cool, dry and ventilated warehouse, avoid long-term vertical leaning storage to prevent permanent warping deformation.
- Keep away from high-temperature heat sources, direct sunlight, oil stains, gasoline and corrosive chemical solvents, to prevent rubber aging, hardening, cracking and surface viscosity loss.
- Do not stack heavy metal objects, hard steel plates and sharp tools on the rubber pad to avoid surface indentation, scratch and internal structural damage.
- Keep the dust-proof PE packaging film wrapped when the rubber pad is temporarily unused, reduce long-term air oxidation aging speed.
Maintenance Instructions
Daily Maintenance
Clean surface rubber debris and residual shoe materials; check for deep cutting marks, cracks and surface damage.
Weekly Maintenance
Flip and rotate the rubber pad to balance wear position; wipe oil stains and dirt on the surface with neutral cleaning agent.
Monthly Maintenance
Comprehensively inspect the whole plate for aging cracking, serious groove wear; replace severely worn pads in time to avoid incomplete material cutting.
Usage Precaution
Sharp-edged steel knife molds are forbidden to slide and drag freely on the rubber pad surface to reduce artificial scratch damage.
Recycling Reminder
Worn waste rubber cutting pads can be recycled and reprocessed into industrial rubber raw materials for secondary utilization.
Die Cutting Rubber Pad For Shoe Making, Wear-resistant Cutting Press Board For Flyknit Fabric, Microfiber Leather, EVA Foam Blanking
Model:DC-RUBBER-PAD
Specification Parameter Details Core Material High density wear-resistant vulcanized rubber composite Standard Sheet Size 1200mm×800mm; Custom cut-to-size available Thickness Options 15mm / 20mm / 25mm / 30mm Surface Feature Matte dark green anti-slip texture, uniform compact internal structure Single Sheet Weight 28.8 KG (20mm benchmark thickness) Packaging Each rubber pad wrapped with dust-proof PE film, hard carton outer packaging Quantity Per Export Carton 2 pcs Carton Dimension (L×W×H) 1260×860×70 mm Carton Net Weight 57.6 KG Carton Gross Weight 64.3 KG
Key ProductFeatures
High-density vulcanized rubber raw material, ultra-high wear resistance, effectively resist repeated impact and cutting of steel die cutters, long service life, reduce frequent pad replacement cost for shoe factories.
Good elastic buffer performance, evenly disperse the pressure of hydraulic cutting machine during blanking, avoid knife mold collapse and material indentation, ensure neat and smooth cutting edges of flyknit fabric, microfiber leather, PU and EVA foam.
Compact internal structure without pores, no brittle cracking or chipping under long-time high-frequency stamping, no rubber debris mixed into shoe materials to cause defective products.
Matte dark green anti-slip surface texture, effectively prevent sliding displacement of raw materials and steel knife molds during high-speed cutting, improve cutting precision and production safety.
Stable hardness, moderate soft and hard balance, neither too hard to wear knife mold quickly nor too soft to cause material incomplete cutting; suitable for all common shoe raw material blanking work.
Customizable cutting size and thickness, support large whole sheet and small split sizes, adapt to different hydraulic cutting machine table sizes of small sample workshops and mass production shoe factories.
Low-odor environmental vulcanization formula, no pungent rubber odor, no harmful volatile substances, meet factory workshop environmental standards and export footwear supporting material safety requirements.
Flat uniform thickness of the whole plate, no warping, no concave-convex deformation, keep stable horizontal bearing during long-term continuous cutting operation.
Application Fields
This wear-resistant die cutting rubber pad is widely matched with hydraulic shoe cutting presses, used for blanking and stamping of all kinds of shoe raw materials: flyknit fabric, engineering mesh cloth, microfiber synthetic leather, suede PU, matte nubuck leather, EVA foam, non-woven interlining, hot melt adhesive film, insole materials, toe puff and heel counter sheets, etc. It is an essential supporting consumable for shoe material cutting workshops, sample development rooms and large-scale automated shoemaking production lines.
Operation Guidance
- Clean the metal worktable of the cutting machine thoroughly before laying the rubber pad, remove metal scraps, burrs and sundries to avoid scratching the bottom of the rubber plate.
- Place the rubber pad flat and centered on the cutting machine table, ensure no tilting or empty gaps under the plate to prevent uneven force during stamping.
- Adjust the cutting stroke pressure reasonably according to the thickness and hardness of the shoe material; avoid excessive instantaneous pressure leading to accelerated rubber pad wear.
- Regularly rotate the rubber pad left-right and front-back during daily use to make the wear uniform on the whole plate and extend overall service life.
- Clean rubber scraps and residual shoe materials on the pad surface after daily work, keep the surface smooth and clean to guarantee neat cutting edges of subsequent materials.
StorageGuidance
- Store rubber cutting pads flatly in cool, dry and ventilated warehouse, avoid long-term vertical leaning storage to prevent permanent warping deformation.
- Keep away from high-temperature heat sources, direct sunlight, oil stains, gasoline and corrosive chemical solvents, to prevent rubber aging, hardening, cracking and surface viscosity loss.
- Do not stack heavy metal objects, hard steel plates and sharp tools on the rubber pad to avoid surface indentation, scratch and internal structural damage.
- Keep the dust-proof PE packaging film wrapped when the rubber pad is temporarily unused, reduce long-term air oxidation aging speed.
Maintenance Instructions
Daily Maintenance
Clean surface rubber debris and residual shoe materials; check for deep cutting marks, cracks and surface damage.
Weekly Maintenance
Flip and rotate the rubber pad to balance wear position; wipe oil stains and dirt on the surface with neutral cleaning agent.
Monthly Maintenance
Comprehensively inspect the whole plate for aging cracking, serious groove wear; replace severely worn pads in time to avoid incomplete material cutting.
Usage Precaution
Sharp-edged steel knife molds are forbidden to slide and drag freely on the rubber pad surface to reduce artificial scratch damage.
Recycling Reminder
Worn waste rubber cutting pads can be recycled and reprocessed into industrial rubber raw materials for secondary utilization.
Die Cutting Rubber Pad For Shoe Making, Wear-resistant Cutting Press Board For Flyknit Fabric, Microfiber Leather, EVA Foam Blanking
Model:DC-RUBBER-PAD
Specification Parameter Details Core Material High density wear-resistant vulcanized rubber composite Standard Sheet Size 1200mm×800mm; Custom cut-to-size available Thickness Options 15mm / 20mm / 25mm / 30mm Surface Feature Matte dark green anti-slip texture, uniform compact internal structure Single Sheet Weight 28.8 KG (20mm benchmark thickness) Packaging Each rubber pad wrapped with dust-proof PE film, hard carton outer packaging Quantity Per Export Carton 2 pcs Carton Dimension (L×W×H) 1260×860×70 mm Carton Net Weight 57.6 KG Carton Gross Weight 64.3 KG
Key ProductFeatures
High-density vulcanized rubber raw material, ultra-high wear resistance, effectively resist repeated impact and cutting of steel die cutters, long service life, reduce frequent pad replacement cost for shoe factories.
Good elastic buffer performance, evenly disperse the pressure of hydraulic cutting machine during blanking, avoid knife mold collapse and material indentation, ensure neat and smooth cutting edges of flyknit fabric, microfiber leather, PU and EVA foam.
Compact internal structure without pores, no brittle cracking or chipping under long-time high-frequency stamping, no rubber debris mixed into shoe materials to cause defective products.
Matte dark green anti-slip surface texture, effectively prevent sliding displacement of raw materials and steel knife molds during high-speed cutting, improve cutting precision and production safety.
Stable hardness, moderate soft and hard balance, neither too hard to wear knife mold quickly nor too soft to cause material incomplete cutting; suitable for all common shoe raw material blanking work.
Customizable cutting size and thickness, support large whole sheet and small split sizes, adapt to different hydraulic cutting machine table sizes of small sample workshops and mass production shoe factories.
Low-odor environmental vulcanization formula, no pungent rubber odor, no harmful volatile substances, meet factory workshop environmental standards and export footwear supporting material safety requirements.
Flat uniform thickness of the whole plate, no warping, no concave-convex deformation, keep stable horizontal bearing during long-term continuous cutting operation.
Application Fields
This wear-resistant die cutting rubber pad is widely matched with hydraulic shoe cutting presses, used for blanking and stamping of all kinds of shoe raw materials: flyknit fabric, engineering mesh cloth, microfiber synthetic leather, suede PU, matte nubuck leather, EVA foam, non-woven interlining, hot melt adhesive film, insole materials, toe puff and heel counter sheets, etc. It is an essential supporting consumable for shoe material cutting workshops, sample development rooms and large-scale automated shoemaking production lines.
Operation Guidance
- Clean the metal worktable of the cutting machine thoroughly before laying the rubber pad, remove metal scraps, burrs and sundries to avoid scratching the bottom of the rubber plate.
- Place the rubber pad flat and centered on the cutting machine table, ensure no tilting or empty gaps under the plate to prevent uneven force during stamping.
- Adjust the cutting stroke pressure reasonably according to the thickness and hardness of the shoe material; avoid excessive instantaneous pressure leading to accelerated rubber pad wear.
- Regularly rotate the rubber pad left-right and front-back during daily use to make the wear uniform on the whole plate and extend overall service life.
- Clean rubber scraps and residual shoe materials on the pad surface after daily work, keep the surface smooth and clean to guarantee neat cutting edges of subsequent materials.
StorageGuidance
- Store rubber cutting pads flatly in cool, dry and ventilated warehouse, avoid long-term vertical leaning storage to prevent permanent warping deformation.
- Keep away from high-temperature heat sources, direct sunlight, oil stains, gasoline and corrosive chemical solvents, to prevent rubber aging, hardening, cracking and surface viscosity loss.
- Do not stack heavy metal objects, hard steel plates and sharp tools on the rubber pad to avoid surface indentation, scratch and internal structural damage.
- Keep the dust-proof PE packaging film wrapped when the rubber pad is temporarily unused, reduce long-term air oxidation aging speed.
Maintenance Instructions
Daily Maintenance
Clean surface rubber debris and residual shoe materials; check for deep cutting marks, cracks and surface damage.
Weekly Maintenance
Flip and rotate the rubber pad to balance wear position; wipe oil stains and dirt on the surface with neutral cleaning agent.
Monthly Maintenance
Comprehensively inspect the whole plate for aging cracking, serious groove wear; replace severely worn pads in time to avoid incomplete material cutting.
Usage Precaution
Sharp-edged steel knife molds are forbidden to slide and drag freely on the rubber pad surface to reduce artificial scratch damage.
Recycling Reminder
Worn waste rubber cutting pads can be recycled and reprocessed into industrial rubber raw materials for secondary utilization.
Die Cutting Rubber Pad For Shoe Making, Wear-resistant Cutting Press Board For Flyknit Fabric, Microfiber Leather, EVA Foam Blanking
Model:DC-RUBBER-PAD
Specification Parameter Details Core Material High density wear-resistant vulcanized rubber composite Standard Sheet Size 1200mm×800mm; Custom cut-to-size available Thickness Options 15mm / 20mm / 25mm / 30mm Surface Feature Matte dark green anti-slip texture, uniform compact internal structure Single Sheet Weight 28.8 KG (20mm benchmark thickness) Packaging Each rubber pad wrapped with dust-proof PE film, hard carton outer packaging Quantity Per Export Carton 2 pcs Carton Dimension (L×W×H) 1260×860×70 mm Carton Net Weight 57.6 KG Carton Gross Weight 64.3 KG
Key ProductFeatures
High-density vulcanized rubber raw material, ultra-high wear resistance, effectively resist repeated impact and cutting of steel die cutters, long service life, reduce frequent pad replacement cost for shoe factories.
Good elastic buffer performance, evenly disperse the pressure of hydraulic cutting machine during blanking, avoid knife mold collapse and material indentation, ensure neat and smooth cutting edges of flyknit fabric, microfiber leather, PU and EVA foam.
Compact internal structure without pores, no brittle cracking or chipping under long-time high-frequency stamping, no rubber debris mixed into shoe materials to cause defective products.
Matte dark green anti-slip surface texture, effectively prevent sliding displacement of raw materials and steel knife molds during high-speed cutting, improve cutting precision and production safety.
Stable hardness, moderate soft and hard balance, neither too hard to wear knife mold quickly nor too soft to cause material incomplete cutting; suitable for all common shoe raw material blanking work.
Customizable cutting size and thickness, support large whole sheet and small split sizes, adapt to different hydraulic cutting machine table sizes of small sample workshops and mass production shoe factories.
Low-odor environmental vulcanization formula, no pungent rubber odor, no harmful volatile substances, meet factory workshop environmental standards and export footwear supporting material safety requirements.
Flat uniform thickness of the whole plate, no warping, no concave-convex deformation, keep stable horizontal bearing during long-term continuous cutting operation.
Application Fields
This wear-resistant die cutting rubber pad is widely matched with hydraulic shoe cutting presses, used for blanking and stamping of all kinds of shoe raw materials: flyknit fabric, engineering mesh cloth, microfiber synthetic leather, suede PU, matte nubuck leather, EVA foam, non-woven interlining, hot melt adhesive film, insole materials, toe puff and heel counter sheets, etc. It is an essential supporting consumable for shoe material cutting workshops, sample development rooms and large-scale automated shoemaking production lines.
Operation Guidance
- Clean the metal worktable of the cutting machine thoroughly before laying the rubber pad, remove metal scraps, burrs and sundries to avoid scratching the bottom of the rubber plate.
- Place the rubber pad flat and centered on the cutting machine table, ensure no tilting or empty gaps under the plate to prevent uneven force during stamping.
- Adjust the cutting stroke pressure reasonably according to the thickness and hardness of the shoe material; avoid excessive instantaneous pressure leading to accelerated rubber pad wear.
- Regularly rotate the rubber pad left-right and front-back during daily use to make the wear uniform on the whole plate and extend overall service life.
- Clean rubber scraps and residual shoe materials on the pad surface after daily work, keep the surface smooth and clean to guarantee neat cutting edges of subsequent materials.
StorageGuidance
- Store rubber cutting pads flatly in cool, dry and ventilated warehouse, avoid long-term vertical leaning storage to prevent permanent warping deformation.
- Keep away from high-temperature heat sources, direct sunlight, oil stains, gasoline and corrosive chemical solvents, to prevent rubber aging, hardening, cracking and surface viscosity loss.
- Do not stack heavy metal objects, hard steel plates and sharp tools on the rubber pad to avoid surface indentation, scratch and internal structural damage.
- Keep the dust-proof PE packaging film wrapped when the rubber pad is temporarily unused, reduce long-term air oxidation aging speed.
Maintenance Instructions
Die Cutting Rubber Pad For Shoe Making, Wear-resistant Cutting Press Board For Flyknit Fabric, Microfiber Leather, EVA Foam Blanking
Model:DC-RUBBER-PAD
| Specification | Parameter Details |
|---|---|
| Core Material | High density wear-resistant vulcanized rubber composite |
| Standard Sheet Size | 1200mm×800mm; Custom cut-to-size available |
| Thickness Options | 15mm / 20mm / 25mm / 30mm |
| Surface Feature | Matte dark green anti-slip texture, uniform compact internal structure |
| Single Sheet Weight | 28.8 KG (20mm benchmark thickness) |
| Packaging | Each rubber pad wrapped with dust-proof PE film, hard carton outer packaging |
| Quantity Per Export Carton | 2 pcs |
| Carton Dimension (L×W×H) | 1260×860×70 mm |
| Carton Net Weight | 57.6 KG |
| Carton Gross Weight | 64.3 KG |
Key ProductFeatures
Application Fields
This wear-resistant die cutting rubber pad is widely matched with hydraulic shoe cutting presses, used for blanking and stamping of all kinds of shoe raw materials: flyknit fabric, engineering mesh cloth, microfiber synthetic leather, suede PU, matte nubuck leather, EVA foam, non-woven interlining, hot melt adhesive film, insole materials, toe puff and heel counter sheets, etc. It is an essential supporting consumable for shoe material cutting workshops, sample development rooms and large-scale automated shoemaking production lines.
Operation Guidance
- Clean the metal worktable of the cutting machine thoroughly before laying the rubber pad, remove metal scraps, burrs and sundries to avoid scratching the bottom of the rubber plate.
- Place the rubber pad flat and centered on the cutting machine table, ensure no tilting or empty gaps under the plate to prevent uneven force during stamping.
- Adjust the cutting stroke pressure reasonably according to the thickness and hardness of the shoe material; avoid excessive instantaneous pressure leading to accelerated rubber pad wear.
- Regularly rotate the rubber pad left-right and front-back during daily use to make the wear uniform on the whole plate and extend overall service life.
- Clean rubber scraps and residual shoe materials on the pad surface after daily work, keep the surface smooth and clean to guarantee neat cutting edges of subsequent materials.
StorageGuidance
- Store rubber cutting pads flatly in cool, dry and ventilated warehouse, avoid long-term vertical leaning storage to prevent permanent warping deformation.
- Keep away from high-temperature heat sources, direct sunlight, oil stains, gasoline and corrosive chemical solvents, to prevent rubber aging, hardening, cracking and surface viscosity loss.
- Do not stack heavy metal objects, hard steel plates and sharp tools on the rubber pad to avoid surface indentation, scratch and internal structural damage.
- Keep the dust-proof PE packaging film wrapped when the rubber pad is temporarily unused, reduce long-term air oxidation aging speed.
Maintenance InstructionsDaily Maintenance
Clean surface rubber debris and residual shoe materials; check for deep cutting marks, cracks and surface damage.
Weekly Maintenance
Flip and rotate the rubber pad to balance wear position; wipe oil stains and dirt on the surface with neutral cleaning agent.
Monthly Maintenance
Comprehensively inspect the whole plate for aging cracking, serious groove wear; replace severely worn pads in time to avoid incomplete material cutting.
Usage Precaution
Sharp-edged steel knife molds are forbidden to slide and drag freely on the rubber pad surface to reduce artificial scratch damage.
Recycling Reminder
Worn waste rubber cutting pads can be recycled and reprocessed into industrial rubber raw materials for secondary utilization.
