Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole
Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole
Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole
Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole
Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole
Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole
Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole
Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole
Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole
Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole
Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole

Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole

FOB
サイズ:
L(70)*W(45)*H(18) cm
最小注文数量:
25kg
配送方法:
快递
数量(個):
1
サンプル:有料サポートサンプルを取得する
製品情報
よくある質問
ディテール
数量(個):1
体積:0.0567 m³
最小注文数量:25kg
G.W:26.2 kg
リードタイム:15 working day
サイズ:L(70)*W(45)*H(18) cm
N.W:25 kg
配送方法:快递
規格番号:4–6 mm / 7–9 mm (Single Particle Diameter)
製品番号:ETPU-05 / ETPU-08
製品ディテール

Supercritical Foaming E-TPU Pellets, Expanded Thermoplastic Polyurethane Popcorn Granules For Running Shoe Midsole

Model:ETPU-05 / ETPU-08


SpecificationETPU-05 Low Density GradeETPU-08 High Rebound Grade
Single Particle Diameter4–6 mm7–9 mm
Particle Density0.05 g/cm³0.08 g/cm³
MaterialSupercritical physical foamed thermoplastic polyurethaneSupercritical physical foamed thermoplastic polyurethane
ColorOff-white porous spherical pelletOff-white porous spherical pellet
Rebound Rate≥ 60%≥ 70%
Compression Set≤ 25%≤ 18%
Heat Resistance-20℃ ~ 80℃ stable performance-20℃ ~ 80℃ stable performance
Packing Form25kg moisture-proof woven bag with inner PE liner25kg moisture-proof woven bag with inner PE liner
Bulk Weight Per Bag25 KG net weight25 KG net weight
Carton/Bag Dimensions700×450×180 mm700×450×200 mm
Gross Weight Per Bag26.2 KG26.5 KG


Key Product Features


  • Produced via supercritical CO₂ physical foaming, no chemical foaming agent residue, meets footwear environmental protection standards
  • Uniform porous internal structure, lightweight with outstanding shock absorption and energy return performance
  • Excellent compression recovery, long-term repeated foot loading will not cause permanent collapse of shoe midsole
  • Good low and high temperature tolerance, rebound performance stays stable in different seasonal use scenarios
  • Firm inter-particle fusion during mould hot pressing, less delamination risk for finished midsole blanks
  • Consistent particle size and density in each batch, stable molding shrinkage rate for mass shoe production
  • Low water absorption, effectively reduces midsole weight gain after rainy day wetting
  • Outstanding fatigue resistance, adapts to long-distance running and daily high-frequency walking wear
  • Can be blended with different density grades to adjust midsole hardness for diversified shoe design demands
  • Clean raw material without impurities, lowers defective rate during injection and hot press molding
  • Application Fields

    These E-TPU popcorn pellets are supplied to footwear material factories, midsole molding workshops, sports shoe brands and shoe R&D laboratories. Mainly used for compression molding of running shoe, casual sneaker and training shoe midsoles; also applicable for shock-absorbing insoles, sport protective padding and other elastic footwear components. Two density grades satisfy lightweight soft midsole and high-rebound performance midsole development respectively.

    Operation Guidance


  • Keep pellets sealed before processing to avoid moisture absorption from humid air
  • Match hot pressing temperature, pressure and holding time according to selected density grade
  • Spread pellets evenly inside mould cavity to ensure uniform density of finished midsole
  • Cool molded parts fully under pressure before demoulding to reduce deformation
  • Store unused pellets in sealed moisture-proof packaging after production
  • Storage Guidance

  • Stock in dry, ventilated warehouse with relative humidity below 65%
  • Keep away from direct sunlight, heat sources and oily corrosive substances
  • Stack bagged goods no more than 8 layers high to prevent particle crushing by heavy pressure


  • Maintenance Instructions

    Daily Check

    Inspect package sealing condition, confirm no dampness or particle caking

    Monthly Inspection

    Sample check particle looseness; avoid long storage over 12 months for best molding effect

    Usage Note

    Do not mix E-TPU pellets with other plastic granules without formula test

    Recycling Reminder

    Defective molded midsole scraps can be recycled for secondary granulation with professional equipment



    連絡先
    情報を残していただければ、こちらからご連絡いたします。

    GISMA広州

    会場住所: ポリワールドトレードエキスポセンター (PWTC)、広州、中国

    2026年5月28日 時間: 9:00 - 17:00

    2026年5月29日 時間: 9:00 - 17:00

    2026年5月30日 時間: 9:00 - 15:00

    お問い合わせ

    お電話はこちら:

    86-769-85985038

    86-769-85985028

    メールはこちら:

    gsma2017@163.com

    電話①
    電話②
    WhatsApp ①
    WhatsApp②
    Wechat ①
    Wechat ②