ディテール
数量(個):250
体積:1.408 m³
最小注文数量:250 pcs
G.W:390 kg
リードタイム:15 working day
サイズ:L(110)*W(160)*H(80) cm
N.W:350 kg
配送方法:快递
規格番号:0.8 mm / 1.2 mm (Sheet Thickness)
製品番号:HC-LT08 / HC-LT12
製品ディテール
Hot Melt Shoe Counter Sheet, Low Temperature Hot Melt Toe Puff & Heel Counter For Shoe Toe & Heel Shaping
Model:HC-LT08 / HC-LT12
Specification HC-LT08 Thin Grade HC-LT12 Standard Grade Sheet Thickness 0.8 mm 1.2 mm Common Sheet Size 1000mm × 1500mm 1000mm × 1500mm Base Material Polyester non-woven fabric impregnated with low-temp hot melt adhesive Polyester non-woven fabric impregnated with low-temp hot melt adhesive Activation Melting Point 95–110℃ 95–110℃ Hardness After Molding Medium soft rigidity Medium firm rigidity Single Sheet Net Weight 1.4 KG 2.0 KG Packing Form Waterproof PE film wrapping, stacked on pallet Waterproof PE film wrapping, stacked on pallet Quantity Per Pallet 250 pcs 180 pcs Pallet Dimension (L×W×H) 1100×1600×800 mm 1100×1600×800 mm Pallet Gross Weight 390 KG 410 KG
Key Product Features
Low temperature hot melt formula, lower hot pressing temperature requirement, reduces energy consumption and avoids scalding shoe upper fabrics
Non-woven fabric base with uniform adhesive impregnation, stable shaping effect after thermoforming, less deformation in long-term wearing
Good flexibility after sizing, no brittle hard feel, fits the curved structure of shoe toe cap and heel counter naturally
Strong adhesion with leather, PU synthetic leather, canvas and flyknit uppers, not easy to delaminate after repeated bending
Excellent moisture resistance, shaping rigidity will not drop obviously under humid wearing environment
Consistent thickness and adhesive distribution batch by batch, stable shrinkage rate during mass production processing
Easy die cutting for custom toe/heel contour, suitable for manual sample making and automatic punching production
No irritating odor after hot pressing, complies with footwear environmental protection requirements
Two thickness options to match light casual shoes and heavy leather shoes respectively
Good storage stability at normal temperature, no pre-bonding or adhesive leakage before processing
Application Fields
This low-temperature hot melt shoe counter material is widely used in shoe material factories, shoe assembly workshops and footwear sample development departments. It is specially used for shaping reinforcement of shoe toe puff and heel counter, applicable for leather shoes, casual sneakers, dress shoes, work shoes and children's footwear. The thin grade suits lightweight soft uppers, while the standard grade provides firmer support for formal and heavy-duty shoes.
Operation Guidance
- Cut the sheet into required toe/heel shapes by die cutting before hot forming
- Place the cut piece between upper lining and outer material, set hot pressing parameters at 100–115℃ with proper pressure
- Keep pressing for 4–7 seconds, then cool the shoe parts under pressure to finalize shaping effect
- Seal leftover sheets with waterproof film timely to prevent moisture absorption
- Do not store stacked sheets under high temperature environment to avoid pre-melting adhesion
Storage Guidance
- Store in dry, cool and ventilated warehouse, ambient temperature kept below 30℃
- Keep away from heat sources, direct sunlight and humid ground, place on pallets for moisture proof
- Stack flatly, avoid heavy sharp extrusion to prevent sheet deformation and adhesive migration
Maintenance & Repair Instructions
Daily Check
Check package sealing status, confirm no dampness or local adhesive seepage
Monthly Inspection
Sample test hot melt activation performance, prioritize early batches for production following FIFO rule
Usage Note
Adjust hot pressing time and temperature according to upper fabric thickness to prevent over-melting penetration
Recycling Reminder
Clean die-cut leftover scraps can be centrally collected for professional material recycling

Hot Melt Shoe Counter Sheet, Low Temperature Hot Melt Toe Puff & Heel Counter For Shoe Toe & Heel Shaping
Model:HC-LT08 / HC-LT12
Specification HC-LT08 Thin Grade HC-LT12 Standard Grade Sheet Thickness 0.8 mm 1.2 mm Common Sheet Size 1000mm × 1500mm 1000mm × 1500mm Base Material Polyester non-woven fabric impregnated with low-temp hot melt adhesive Polyester non-woven fabric impregnated with low-temp hot melt adhesive Activation Melting Point 95–110℃ 95–110℃ Hardness After Molding Medium soft rigidity Medium firm rigidity Single Sheet Net Weight 1.4 KG 2.0 KG Packing Form Waterproof PE film wrapping, stacked on pallet Waterproof PE film wrapping, stacked on pallet Quantity Per Pallet 250 pcs 180 pcs Pallet Dimension (L×W×H) 1100×1600×800 mm 1100×1600×800 mm Pallet Gross Weight 390 KG 410 KG
Key Product Features
Low temperature hot melt formula, lower hot pressing temperature requirement, reduces energy consumption and avoids scalding shoe upper fabrics
Non-woven fabric base with uniform adhesive impregnation, stable shaping effect after thermoforming, less deformation in long-term wearing
Good flexibility after sizing, no brittle hard feel, fits the curved structure of shoe toe cap and heel counter naturally
Strong adhesion with leather, PU synthetic leather, canvas and flyknit uppers, not easy to delaminate after repeated bending
Excellent moisture resistance, shaping rigidity will not drop obviously under humid wearing environment
Consistent thickness and adhesive distribution batch by batch, stable shrinkage rate during mass production processing
Easy die cutting for custom toe/heel contour, suitable for manual sample making and automatic punching production
No irritating odor after hot pressing, complies with footwear environmental protection requirements
Two thickness options to match light casual shoes and heavy leather shoes respectively
Good storage stability at normal temperature, no pre-bonding or adhesive leakage before processing
Application Fields
This low-temperature hot melt shoe counter material is widely used in shoe material factories, shoe assembly workshops and footwear sample development departments. It is specially used for shaping reinforcement of shoe toe puff and heel counter, applicable for leather shoes, casual sneakers, dress shoes, work shoes and children's footwear. The thin grade suits lightweight soft uppers, while the standard grade provides firmer support for formal and heavy-duty shoes.
Operation Guidance
- Cut the sheet into required toe/heel shapes by die cutting before hot forming
- Place the cut piece between upper lining and outer material, set hot pressing parameters at 100–115℃ with proper pressure
- Keep pressing for 4–7 seconds, then cool the shoe parts under pressure to finalize shaping effect
- Seal leftover sheets with waterproof film timely to prevent moisture absorption
- Do not store stacked sheets under high temperature environment to avoid pre-melting adhesion
Storage Guidance
- Store in dry, cool and ventilated warehouse, ambient temperature kept below 30℃
- Keep away from heat sources, direct sunlight and humid ground, place on pallets for moisture proof
- Stack flatly, avoid heavy sharp extrusion to prevent sheet deformation and adhesive migration
Maintenance & Repair Instructions
Daily Check
Check package sealing status, confirm no dampness or local adhesive seepage
Monthly Inspection
Sample test hot melt activation performance, prioritize early batches for production following FIFO rule
Usage Note
Adjust hot pressing time and temperature according to upper fabric thickness to prevent over-melting penetration
Recycling Reminder
Clean die-cut leftover scraps can be centrally collected for professional material recycling

Hot Melt Shoe Counter Sheet, Low Temperature Hot Melt Toe Puff & Heel Counter For Shoe Toe & Heel Shaping
Model:HC-LT08 / HC-LT12
Specification HC-LT08 Thin Grade HC-LT12 Standard Grade Sheet Thickness 0.8 mm 1.2 mm Common Sheet Size 1000mm × 1500mm 1000mm × 1500mm Base Material Polyester non-woven fabric impregnated with low-temp hot melt adhesive Polyester non-woven fabric impregnated with low-temp hot melt adhesive Activation Melting Point 95–110℃ 95–110℃ Hardness After Molding Medium soft rigidity Medium firm rigidity Single Sheet Net Weight 1.4 KG 2.0 KG Packing Form Waterproof PE film wrapping, stacked on pallet Waterproof PE film wrapping, stacked on pallet Quantity Per Pallet 250 pcs 180 pcs Pallet Dimension (L×W×H) 1100×1600×800 mm 1100×1600×800 mm Pallet Gross Weight 390 KG 410 KG
Key Product Features
Low temperature hot melt formula, lower hot pressing temperature requirement, reduces energy consumption and avoids scalding shoe upper fabrics
Non-woven fabric base with uniform adhesive impregnation, stable shaping effect after thermoforming, less deformation in long-term wearing
Good flexibility after sizing, no brittle hard feel, fits the curved structure of shoe toe cap and heel counter naturally
Strong adhesion with leather, PU synthetic leather, canvas and flyknit uppers, not easy to delaminate after repeated bending
Excellent moisture resistance, shaping rigidity will not drop obviously under humid wearing environment
Consistent thickness and adhesive distribution batch by batch, stable shrinkage rate during mass production processing
Easy die cutting for custom toe/heel contour, suitable for manual sample making and automatic punching production
No irritating odor after hot pressing, complies with footwear environmental protection requirements
Two thickness options to match light casual shoes and heavy leather shoes respectively
Good storage stability at normal temperature, no pre-bonding or adhesive leakage before processing
Application Fields
This low-temperature hot melt shoe counter material is widely used in shoe material factories, shoe assembly workshops and footwear sample development departments. It is specially used for shaping reinforcement of shoe toe puff and heel counter, applicable for leather shoes, casual sneakers, dress shoes, work shoes and children's footwear. The thin grade suits lightweight soft uppers, while the standard grade provides firmer support for formal and heavy-duty shoes.
Operation Guidance
- Cut the sheet into required toe/heel shapes by die cutting before hot forming
- Place the cut piece between upper lining and outer material, set hot pressing parameters at 100–115℃ with proper pressure
- Keep pressing for 4–7 seconds, then cool the shoe parts under pressure to finalize shaping effect
- Seal leftover sheets with waterproof film timely to prevent moisture absorption
- Do not store stacked sheets under high temperature environment to avoid pre-melting adhesion
Storage Guidance
- Store in dry, cool and ventilated warehouse, ambient temperature kept below 30℃
- Keep away from heat sources, direct sunlight and humid ground, place on pallets for moisture proof
- Stack flatly, avoid heavy sharp extrusion to prevent sheet deformation and adhesive migration
Maintenance & Repair Instructions
Daily Check
Check package sealing status, confirm no dampness or local adhesive seepage
Monthly Inspection
Sample test hot melt activation performance, prioritize early batches for production following FIFO rule
Usage Note
Adjust hot pressing time and temperature according to upper fabric thickness to prevent over-melting penetration
Recycling Reminder
Clean die-cut leftover scraps can be centrally collected for professional material recycling

Hot Melt Shoe Counter Sheet, Low Temperature Hot Melt Toe Puff & Heel Counter For Shoe Toe & Heel Shaping
Model:HC-LT08 / HC-LT12
Specification HC-LT08 Thin Grade HC-LT12 Standard Grade Sheet Thickness 0.8 mm 1.2 mm Common Sheet Size 1000mm × 1500mm 1000mm × 1500mm Base Material Polyester non-woven fabric impregnated with low-temp hot melt adhesive Polyester non-woven fabric impregnated with low-temp hot melt adhesive Activation Melting Point 95–110℃ 95–110℃ Hardness After Molding Medium soft rigidity Medium firm rigidity Single Sheet Net Weight 1.4 KG 2.0 KG Packing Form Waterproof PE film wrapping, stacked on pallet Waterproof PE film wrapping, stacked on pallet Quantity Per Pallet 250 pcs 180 pcs Pallet Dimension (L×W×H) 1100×1600×800 mm 1100×1600×800 mm Pallet Gross Weight 390 KG 410 KG
Key Product Features
Low temperature hot melt formula, lower hot pressing temperature requirement, reduces energy consumption and avoids scalding shoe upper fabrics
Non-woven fabric base with uniform adhesive impregnation, stable shaping effect after thermoforming, less deformation in long-term wearing
Good flexibility after sizing, no brittle hard feel, fits the curved structure of shoe toe cap and heel counter naturally
Strong adhesion with leather, PU synthetic leather, canvas and flyknit uppers, not easy to delaminate after repeated bending
Excellent moisture resistance, shaping rigidity will not drop obviously under humid wearing environment
Consistent thickness and adhesive distribution batch by batch, stable shrinkage rate during mass production processing
Easy die cutting for custom toe/heel contour, suitable for manual sample making and automatic punching production
No irritating odor after hot pressing, complies with footwear environmental protection requirements
Two thickness options to match light casual shoes and heavy leather shoes respectively
Good storage stability at normal temperature, no pre-bonding or adhesive leakage before processing
Application Fields
This low-temperature hot melt shoe counter material is widely used in shoe material factories, shoe assembly workshops and footwear sample development departments. It is specially used for shaping reinforcement of shoe toe puff and heel counter, applicable for leather shoes, casual sneakers, dress shoes, work shoes and children's footwear. The thin grade suits lightweight soft uppers, while the standard grade provides firmer support for formal and heavy-duty shoes.
Operation Guidance
- Cut the sheet into required toe/heel shapes by die cutting before hot forming
- Place the cut piece between upper lining and outer material, set hot pressing parameters at 100–115℃ with proper pressure
- Keep pressing for 4–7 seconds, then cool the shoe parts under pressure to finalize shaping effect
- Seal leftover sheets with waterproof film timely to prevent moisture absorption
- Do not store stacked sheets under high temperature environment to avoid pre-melting adhesion
Storage Guidance
- Store in dry, cool and ventilated warehouse, ambient temperature kept below 30℃
- Keep away from heat sources, direct sunlight and humid ground, place on pallets for moisture proof
- Stack flatly, avoid heavy sharp extrusion to prevent sheet deformation and adhesive migration
Maintenance & Repair Instructions
Daily Check
Check package sealing status, confirm no dampness or local adhesive seepage
Monthly Inspection
Sample test hot melt activation performance, prioritize early batches for production following FIFO rule
Usage Note
Adjust hot pressing time and temperature according to upper fabric thickness to prevent over-melting penetration
Recycling Reminder
Clean die-cut leftover scraps can be centrally collected for professional material recycling
Hot Melt Shoe Counter Sheet, Low Temperature Hot Melt Toe Puff & Heel Counter For Shoe Toe & Heel Shaping
Model:HC-LT08 / HC-LT12
Specification HC-LT08 Thin Grade HC-LT12 Standard Grade Sheet Thickness 0.8 mm 1.2 mm Common Sheet Size 1000mm × 1500mm 1000mm × 1500mm Base Material Polyester non-woven fabric impregnated with low-temp hot melt adhesive Polyester non-woven fabric impregnated with low-temp hot melt adhesive Activation Melting Point 95–110℃ 95–110℃ Hardness After Molding Medium soft rigidity Medium firm rigidity Single Sheet Net Weight 1.4 KG 2.0 KG Packing Form Waterproof PE film wrapping, stacked on pallet Waterproof PE film wrapping, stacked on pallet Quantity Per Pallet 250 pcs 180 pcs Pallet Dimension (L×W×H) 1100×1600×800 mm 1100×1600×800 mm Pallet Gross Weight 390 KG 410 KG
Key Product Features
Low temperature hot melt formula, lower hot pressing temperature requirement, reduces energy consumption and avoids scalding shoe upper fabrics
Non-woven fabric base with uniform adhesive impregnation, stable shaping effect after thermoforming, less deformation in long-term wearing
Good flexibility after sizing, no brittle hard feel, fits the curved structure of shoe toe cap and heel counter naturally
Strong adhesion with leather, PU synthetic leather, canvas and flyknit uppers, not easy to delaminate after repeated bending
Excellent moisture resistance, shaping rigidity will not drop obviously under humid wearing environment
Consistent thickness and adhesive distribution batch by batch, stable shrinkage rate during mass production processing
Easy die cutting for custom toe/heel contour, suitable for manual sample making and automatic punching production
No irritating odor after hot pressing, complies with footwear environmental protection requirements
Two thickness options to match light casual shoes and heavy leather shoes respectively
Good storage stability at normal temperature, no pre-bonding or adhesive leakage before processing
Application Fields
This low-temperature hot melt shoe counter material is widely used in shoe material factories, shoe assembly workshops and footwear sample development departments. It is specially used for shaping reinforcement of shoe toe puff and heel counter, applicable for leather shoes, casual sneakers, dress shoes, work shoes and children's footwear. The thin grade suits lightweight soft uppers, while the standard grade provides firmer support for formal and heavy-duty shoes.
Operation Guidance
- Cut the sheet into required toe/heel shapes by die cutting before hot forming
- Place the cut piece between upper lining and outer material, set hot pressing parameters at 100–115℃ with proper pressure
- Keep pressing for 4–7 seconds, then cool the shoe parts under pressure to finalize shaping effect
- Seal leftover sheets with waterproof film timely to prevent moisture absorption
- Do not store stacked sheets under high temperature environment to avoid pre-melting adhesion
Storage Guidance
- Store in dry, cool and ventilated warehouse, ambient temperature kept below 30℃
- Keep away from heat sources, direct sunlight and humid ground, place on pallets for moisture proof
- Stack flatly, avoid heavy sharp extrusion to prevent sheet deformation and adhesive migration
Maintenance & Repair Instructions
Hot Melt Shoe Counter Sheet, Low Temperature Hot Melt Toe Puff & Heel Counter For Shoe Toe & Heel Shaping
Model:HC-LT08 / HC-LT12
| Specification | HC-LT08 Thin Grade | HC-LT12 Standard Grade |
|---|---|---|
| Sheet Thickness | 0.8 mm | 1.2 mm |
| Common Sheet Size | 1000mm × 1500mm | 1000mm × 1500mm |
| Base Material | Polyester non-woven fabric impregnated with low-temp hot melt adhesive | Polyester non-woven fabric impregnated with low-temp hot melt adhesive |
| Activation Melting Point | 95–110℃ | 95–110℃ |
| Hardness After Molding | Medium soft rigidity | Medium firm rigidity |
| Single Sheet Net Weight | 1.4 KG | 2.0 KG |
| Packing Form | Waterproof PE film wrapping, stacked on pallet | Waterproof PE film wrapping, stacked on pallet |
| Quantity Per Pallet | 250 pcs | 180 pcs |
| Pallet Dimension (L×W×H) | 1100×1600×800 mm | 1100×1600×800 mm |
| Pallet Gross Weight | 390 KG | 410 KG |
Key Product Features
Application Fields
This low-temperature hot melt shoe counter material is widely used in shoe material factories, shoe assembly workshops and footwear sample development departments. It is specially used for shaping reinforcement of shoe toe puff and heel counter, applicable for leather shoes, casual sneakers, dress shoes, work shoes and children's footwear. The thin grade suits lightweight soft uppers, while the standard grade provides firmer support for formal and heavy-duty shoes.
Operation Guidance
- Cut the sheet into required toe/heel shapes by die cutting before hot forming
- Place the cut piece between upper lining and outer material, set hot pressing parameters at 100–115℃ with proper pressure
- Keep pressing for 4–7 seconds, then cool the shoe parts under pressure to finalize shaping effect
- Seal leftover sheets with waterproof film timely to prevent moisture absorption
- Do not store stacked sheets under high temperature environment to avoid pre-melting adhesion
Storage Guidance
- Store in dry, cool and ventilated warehouse, ambient temperature kept below 30℃
- Keep away from heat sources, direct sunlight and humid ground, place on pallets for moisture proof
- Stack flatly, avoid heavy sharp extrusion to prevent sheet deformation and adhesive migration
Maintenance & Repair InstructionsDaily Check
Check package sealing status, confirm no dampness or local adhesive seepage
Monthly Inspection
Sample test hot melt activation performance, prioritize early batches for production following FIFO rule
Usage Note
Adjust hot pressing time and temperature according to upper fabric thickness to prevent over-melting penetration
Recycling Reminder
Clean die-cut leftover scraps can be centrally collected for professional material recycling



