ディテール
数量（個）:6
体積:0.025839 m³
最小注文数量:6 cans
G.W:30.2 kg
リードタイム:15 working day
サイズ:L(33)*W(27)*H(29) cm
N.W:27 kg
配送方法:快递
規格番号:5L square tin can
製品番号:GLUE-NEO-01
製品ディテール
Yellow Neoprene Contact Adhesive For Shoe Upper Lamination, Shoe-Making Chloroprene Rubber Glue
Model: GLUE-NEO-01
Specification Parameter Details Main Raw Material Chloroprene rubber (neoprene) based contact adhesive Appearance Uniform yellow viscous liquid Unified Packing Spec 5L square tin can Solid Content 28%–32% Open Time 15–35 mins (varies with workshop temperature and humidity) Bonding Principle Contact bonding: apply adhesive on two surfaces respectively, press tightly after tack formation Applicable Materials Genuine leather, PU synthetic leather, microfiber, EVA, rubber outsole, flyknit fabric, canvas for shoemaking Flash Point Flammable liquid, keep far away from open flame strictly Shelf Life 12 months under sealed cool and ventilated storage Export Carton Pack Quantity 6 cans per carton (5L standard square tin) Carton Dimension(L×W×H) 330×270×290 mm Carton Net Weight 27.0 KG Carton Gross Weight 30.2 KG Net Weight Per Can Approx 4.5 KG
Key Product Features
Chloroprene rubber formula provides strong initial tack and permanent bonding strength, anti-peeling after shoe shaping process
Wide material compatibility, fits nearly all mainstream upper and sole raw materials in shoemaking industry
Moderate viscosity enables easy brush application without sagging on vertical vamp surfaces
Outstanding heat resistance and anti-aging performance, bonded parts remain stable under temperature changes during daily wear
Dried adhesive film stays flexible without hardening or cracking after repeated shoe flexing
Unified 5L square tin packing simplifies warehouse management and batch procurement for continuous production
Strict factory filtration reduces impurities to avoid pinholes and bonding defects
Stable performance for long-term mass production in shoemaking workshops
Application Fields
Special bonding adhesive for shoemaking processing
Footwear Industry: Lamination of upper cut pieces, toe puff & heel counter fixation, pre-bonding between upper and midsole, preliminary fitting for rubber outsoles
Leather Goods: Bonding for leather bags, leather belts and handmade leather crafts
Craft Processing: Composite bonding of EVA foam, rubber sheets and various synthetic leathers
Sample-making Workshop: Adhesive matching for new shoe style trial assembly and sample testing
Operation Guidance
Slightly polish bonding surfaces to remove dust and release agents before gluing for better adhesion
Apply thin and even coats on both bonding sides, avoid excessive adhesive accumulation
Press aligned surfaces tightly once the adhesive film becomes tacky with no wet stickiness to finger touch
Ensure full workshop ventilation during operation; smoking and open flames are strictly prohibited
Seal the tin tightly immediately after use to prevent solvent volatilization and thickening
Conduct pre-production bonding tests with actual shoe materials before mass processing
Social Responsibility & Environmental Protection
Optimized solvent formula reduces odor with low VOC emission, complying with mainstream footwear environmental standards.
Outer carton is made of recycled corrugated cardboard printed with water-based ink; tin containers are recyclable after professional cleaning.
Reliable bonding performance effectively reduces finished shoe degumming defects and production material waste.
Full batch quality traceability; complete MSDS and material test reports are available for overseas brand audits.
Standardized workshop ventilation guidance protects workers’ occupational health and fulfills corporate social responsibility.
Yellow Neoprene Contact Adhesive For Shoe Upper Lamination, Shoe-Making Chloroprene Rubber Glue
Model: GLUE-NEO-01
Specification Parameter Details Main Raw Material Chloroprene rubber (neoprene) based contact adhesive Appearance Uniform yellow viscous liquid Unified Packing Spec 5L square tin can Solid Content 28%–32% Open Time 15–35 mins (varies with workshop temperature and humidity) Bonding Principle Contact bonding: apply adhesive on two surfaces respectively, press tightly after tack formation Applicable Materials Genuine leather, PU synthetic leather, microfiber, EVA, rubber outsole, flyknit fabric, canvas for shoemaking Flash Point Flammable liquid, keep far away from open flame strictly Shelf Life 12 months under sealed cool and ventilated storage Export Carton Pack Quantity 6 cans per carton (5L standard square tin) Carton Dimension(L×W×H) 330×270×290 mm Carton Net Weight 27.0 KG Carton Gross Weight 30.2 KG Net Weight Per Can Approx 4.5 KG
Key Product Features
Chloroprene rubber formula provides strong initial tack and permanent bonding strength, anti-peeling after shoe shaping process
Wide material compatibility, fits nearly all mainstream upper and sole raw materials in shoemaking industry
Moderate viscosity enables easy brush application without sagging on vertical vamp surfaces
Outstanding heat resistance and anti-aging performance, bonded parts remain stable under temperature changes during daily wear
Dried adhesive film stays flexible without hardening or cracking after repeated shoe flexing
Unified 5L square tin packing simplifies warehouse management and batch procurement for continuous production
Strict factory filtration reduces impurities to avoid pinholes and bonding defects
Stable performance for long-term mass production in shoemaking workshops
Application Fields
Special bonding adhesive for shoemaking processing
Footwear Industry: Lamination of upper cut pieces, toe puff & heel counter fixation, pre-bonding between upper and midsole, preliminary fitting for rubber outsoles
Leather Goods: Bonding for leather bags, leather belts and handmade leather crafts
Craft Processing: Composite bonding of EVA foam, rubber sheets and various synthetic leathers
Sample-making Workshop: Adhesive matching for new shoe style trial assembly and sample testing
Operation Guidance
Slightly polish bonding surfaces to remove dust and release agents before gluing for better adhesion
Apply thin and even coats on both bonding sides, avoid excessive adhesive accumulation
Press aligned surfaces tightly once the adhesive film becomes tacky with no wet stickiness to finger touch
Ensure full workshop ventilation during operation; smoking and open flames are strictly prohibited
Seal the tin tightly immediately after use to prevent solvent volatilization and thickening
Conduct pre-production bonding tests with actual shoe materials before mass processing
Social Responsibility & Environmental Protection
Optimized solvent formula reduces odor with low VOC emission, complying with mainstream footwear environmental standards.
Outer carton is made of recycled corrugated cardboard printed with water-based ink; tin containers are recyclable after professional cleaning.
Reliable bonding performance effectively reduces finished shoe degumming defects and production material waste.
Full batch quality traceability; complete MSDS and material test reports are available for overseas brand audits.
Standardized workshop ventilation guidance protects workers’ occupational health and fulfills corporate social responsibility.
Yellow Neoprene Contact Adhesive For Shoe Upper Lamination, Shoe-Making Chloroprene Rubber Glue
Model: GLUE-NEO-01
Specification Parameter Details Main Raw Material Chloroprene rubber (neoprene) based contact adhesive Appearance Uniform yellow viscous liquid Unified Packing Spec 5L square tin can Solid Content 28%–32% Open Time 15–35 mins (varies with workshop temperature and humidity) Bonding Principle Contact bonding: apply adhesive on two surfaces respectively, press tightly after tack formation Applicable Materials Genuine leather, PU synthetic leather, microfiber, EVA, rubber outsole, flyknit fabric, canvas for shoemaking Flash Point Flammable liquid, keep far away from open flame strictly Shelf Life 12 months under sealed cool and ventilated storage Export Carton Pack Quantity 6 cans per carton (5L standard square tin) Carton Dimension(L×W×H) 330×270×290 mm Carton Net Weight 27.0 KG Carton Gross Weight 30.2 KG Net Weight Per Can Approx 4.5 KG
Key Product Features
Chloroprene rubber formula provides strong initial tack and permanent bonding strength, anti-peeling after shoe shaping process
Wide material compatibility, fits nearly all mainstream upper and sole raw materials in shoemaking industry
Moderate viscosity enables easy brush application without sagging on vertical vamp surfaces
Outstanding heat resistance and anti-aging performance, bonded parts remain stable under temperature changes during daily wear
Dried adhesive film stays flexible without hardening or cracking after repeated shoe flexing
Unified 5L square tin packing simplifies warehouse management and batch procurement for continuous production
Strict factory filtration reduces impurities to avoid pinholes and bonding defects
Stable performance for long-term mass production in shoemaking workshops
Application Fields
Special bonding adhesive for shoemaking processing
Footwear Industry: Lamination of upper cut pieces, toe puff & heel counter fixation, pre-bonding between upper and midsole, preliminary fitting for rubber outsoles
Leather Goods: Bonding for leather bags, leather belts and handmade leather crafts
Craft Processing: Composite bonding of EVA foam, rubber sheets and various synthetic leathers
Sample-making Workshop: Adhesive matching for new shoe style trial assembly and sample testing
Operation Guidance
Slightly polish bonding surfaces to remove dust and release agents before gluing for better adhesion
Apply thin and even coats on both bonding sides, avoid excessive adhesive accumulation
Press aligned surfaces tightly once the adhesive film becomes tacky with no wet stickiness to finger touch
Ensure full workshop ventilation during operation; smoking and open flames are strictly prohibited
Seal the tin tightly immediately after use to prevent solvent volatilization and thickening
Conduct pre-production bonding tests with actual shoe materials before mass processing
Social Responsibility & Environmental Protection
Optimized solvent formula reduces odor with low VOC emission, complying with mainstream footwear environmental standards.
Outer carton is made of recycled corrugated cardboard printed with water-based ink; tin containers are recyclable after professional cleaning.
Reliable bonding performance effectively reduces finished shoe degumming defects and production material waste.
Full batch quality traceability; complete MSDS and material test reports are available for overseas brand audits.
Standardized workshop ventilation guidance protects workers’ occupational health and fulfills corporate social responsibility.
Yellow Neoprene Contact Adhesive For Shoe Upper Lamination, Shoe-Making Chloroprene Rubber Glue
Model: GLUE-NEO-01
Specification Parameter Details Main Raw Material Chloroprene rubber (neoprene) based contact adhesive Appearance Uniform yellow viscous liquid Unified Packing Spec 5L square tin can Solid Content 28%–32% Open Time 15–35 mins (varies with workshop temperature and humidity) Bonding Principle Contact bonding: apply adhesive on two surfaces respectively, press tightly after tack formation Applicable Materials Genuine leather, PU synthetic leather, microfiber, EVA, rubber outsole, flyknit fabric, canvas for shoemaking Flash Point Flammable liquid, keep far away from open flame strictly Shelf Life 12 months under sealed cool and ventilated storage Export Carton Pack Quantity 6 cans per carton (5L standard square tin) Carton Dimension(L×W×H) 330×270×290 mm Carton Net Weight 27.0 KG Carton Gross Weight 30.2 KG Net Weight Per Can Approx 4.5 KG
Key Product Features
Chloroprene rubber formula provides strong initial tack and permanent bonding strength, anti-peeling after shoe shaping process
Wide material compatibility, fits nearly all mainstream upper and sole raw materials in shoemaking industry
Moderate viscosity enables easy brush application without sagging on vertical vamp surfaces
Outstanding heat resistance and anti-aging performance, bonded parts remain stable under temperature changes during daily wear
Dried adhesive film stays flexible without hardening or cracking after repeated shoe flexing
Unified 5L square tin packing simplifies warehouse management and batch procurement for continuous production
Strict factory filtration reduces impurities to avoid pinholes and bonding defects
Stable performance for long-term mass production in shoemaking workshops
Application Fields
Special bonding adhesive for shoemaking processing
Footwear Industry: Lamination of upper cut pieces, toe puff & heel counter fixation, pre-bonding between upper and midsole, preliminary fitting for rubber outsoles
Leather Goods: Bonding for leather bags, leather belts and handmade leather crafts
Craft Processing: Composite bonding of EVA foam, rubber sheets and various synthetic leathers
Sample-making Workshop: Adhesive matching for new shoe style trial assembly and sample testing
Operation Guidance
Slightly polish bonding surfaces to remove dust and release agents before gluing for better adhesion
Apply thin and even coats on both bonding sides, avoid excessive adhesive accumulation
Press aligned surfaces tightly once the adhesive film becomes tacky with no wet stickiness to finger touch
Ensure full workshop ventilation during operation; smoking and open flames are strictly prohibited
Seal the tin tightly immediately after use to prevent solvent volatilization and thickening
Conduct pre-production bonding tests with actual shoe materials before mass processing
Social Responsibility & Environmental Protection
Optimized solvent formula reduces odor with low VOC emission, complying with mainstream footwear environmental standards.
Outer carton is made of recycled corrugated cardboard printed with water-based ink; tin containers are recyclable after professional cleaning.
Reliable bonding performance effectively reduces finished shoe degumming defects and production material waste.
Full batch quality traceability; complete MSDS and material test reports are available for overseas brand audits.
Standardized workshop ventilation guidance protects workers’ occupational health and fulfills corporate social responsibility.
Yellow Neoprene Contact Adhesive For Shoe Upper Lamination, Shoe-Making Chloroprene Rubber Glue
Model: GLUE-NEO-01
Specification Parameter Details Main Raw Material Chloroprene rubber (neoprene) based contact adhesive Appearance Uniform yellow viscous liquid Unified Packing Spec 5L square tin can Solid Content 28%–32% Open Time 15–35 mins (varies with workshop temperature and humidity) Bonding Principle Contact bonding: apply adhesive on two surfaces respectively, press tightly after tack formation Applicable Materials Genuine leather, PU synthetic leather, microfiber, EVA, rubber outsole, flyknit fabric, canvas for shoemaking Flash Point Flammable liquid, keep far away from open flame strictly Shelf Life 12 months under sealed cool and ventilated storage Export Carton Pack Quantity 6 cans per carton (5L standard square tin) Carton Dimension(L×W×H) 330×270×290 mm Carton Net Weight 27.0 KG Carton Gross Weight 30.2 KG Net Weight Per Can Approx 4.5 KG
Key Product Features
Chloroprene rubber formula provides strong initial tack and permanent bonding strength, anti-peeling after shoe shaping process
Wide material compatibility, fits nearly all mainstream upper and sole raw materials in shoemaking industry
Moderate viscosity enables easy brush application without sagging on vertical vamp surfaces
Outstanding heat resistance and anti-aging performance, bonded parts remain stable under temperature changes during daily wear
Dried adhesive film stays flexible without hardening or cracking after repeated shoe flexing
Unified 5L square tin packing simplifies warehouse management and batch procurement for continuous production
Strict factory filtration reduces impurities to avoid pinholes and bonding defects
Stable performance for long-term mass production in shoemaking workshops
Application Fields
Special bonding adhesive for shoemaking processing
Footwear Industry: Lamination of upper cut pieces, toe puff & heel counter fixation, pre-bonding between upper and midsole, preliminary fitting for rubber outsoles
Leather Goods: Bonding for leather bags, leather belts and handmade leather crafts
Craft Processing: Composite bonding of EVA foam, rubber sheets and various synthetic leathers
Sample-making Workshop: Adhesive matching for new shoe style trial assembly and sample testing
Operation Guidance
Slightly polish bonding surfaces to remove dust and release agents before gluing for better adhesion
Apply thin and even coats on both bonding sides, avoid excessive adhesive accumulation
Press aligned surfaces tightly once the adhesive film becomes tacky with no wet stickiness to finger touch
Ensure full workshop ventilation during operation; smoking and open flames are strictly prohibited
Seal the tin tightly immediately after use to prevent solvent volatilization and thickening
Conduct pre-production bonding tests with actual shoe materials before mass processing
Social Responsibility & Environmental Protection
Optimized solvent formula reduces odor with low VOC emission, complying with mainstream footwear environmental standards.
Outer carton is made of recycled corrugated cardboard printed with water-based ink; tin containers are recyclable after professional cleaning.
Reliable bonding performance effectively reduces finished shoe degumming defects and production material waste.
Full batch quality traceability; complete MSDS and material test reports are available for overseas brand audits.
Standardized workshop ventilation guidance protects workers’ occupational health and fulfills corporate social responsibility.
Yellow Neoprene Contact Adhesive For Shoe Upper Lamination, Shoe-Making Chloroprene Rubber Glue
Model: GLUE-NEO-01
| Specification | Parameter Details |
|---|---|
| Main Raw Material | Chloroprene rubber (neoprene) based contact adhesive |
| Appearance | Uniform yellow viscous liquid |
| Unified Packing Spec | 5L square tin can |
| Solid Content | 28%–32% |
| Open Time | 15–35 mins (varies with workshop temperature and humidity) |
| Bonding Principle | Contact bonding: apply adhesive on two surfaces respectively, press tightly after tack formation |
| Applicable Materials | Genuine leather, PU synthetic leather, microfiber, EVA, rubber outsole, flyknit fabric, canvas for shoemaking |
| Flash Point | Flammable liquid, keep far away from open flame strictly |
| Shelf Life | 12 months under sealed cool and ventilated storage |
| Export Carton Pack Quantity | 6 cans per carton (5L standard square tin) |
| Carton Dimension(L×W×H) | 330×270×290 mm |
| Carton Net Weight | 27.0 KG |
| Carton Gross Weight | 30.2 KG |
| Net Weight Per Can | Approx 4.5 KG |
Key Product Features
Application Fields
Special bonding adhesive for shoemaking processing
Footwear Industry: Lamination of upper cut pieces, toe puff & heel counter fixation, pre-bonding between upper and midsole, preliminary fitting for rubber outsoles
Leather Goods: Bonding for leather bags, leather belts and handmade leather crafts
Craft Processing: Composite bonding of EVA foam, rubber sheets and various synthetic leathers
Sample-making Workshop: Adhesive matching for new shoe style trial assembly and sample testing
Operation Guidance
Social Responsibility & Environmental Protection
Optimized solvent formula reduces odor with low VOC emission, complying with mainstream footwear environmental standards.
Outer carton is made of recycled corrugated cardboard printed with water-based ink; tin containers are recyclable after professional cleaning.
Reliable bonding performance effectively reduces finished shoe degumming defects and production material waste.
Full batch quality traceability; complete MSDS and material test reports are available for overseas brand audits.
Standardized workshop ventilation guidance protects workers’ occupational health and fulfills corporate social responsibility.
